Home > Asia > News
TRIM® E709 nd
Long-life Emulsion (No Dye)
RELEASED: 2010-10-14
|
|
|
TRIM® E709 is a high-quality, universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad applications in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. The stable and predictable performance of E709 makes it a first choice for high-quality, consistent parts manufacturing.
- Very stable formula provides long operational life with consistent performance
- Extremely hard water tolerant
- Very wide application range, suitable for both grinding and machining
- Fine particle size emulsion reduces carryoff and facilitates getting the fluid to the point of cut
- In high-speed turning and milling, E709 has the right balance of cooling and lubrication to provide good tool life and surface finishes
- Compatible with aluminum, steel alloys, cast iron, and yellow metals
- Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
- Coolant is easily removed with water, working solution, or aqueous cleaners
- Easy recycling or disposal with conventional techniques and equipment
- Does not contain or test positive for phenol
- Will run effectively for long periods without the need for costly additives
|
|
TRIM™ SC9030SGM
Cutting and Grinding Fluid Concentrate
RELEASED: 2009-10-26
|
|
|
TRIM™ SC9030SGM is a highly-oily and micro-emulsion cutting fluid concentrate with biological stability. TRIM™ SC9030SGM provides excellent wetting and cooling and anti-corrosion. This product contains a chemical surface active agent for mechanical lubrication. It has broad applications in machining and grinding on ferrous metals such as cast iron, with soluble emulsion oil as residue. The excellent rust preventative and cooling performance of TRIM™ SC9030SGM makes it very suitable for cast iron parts in cutting and grinding operations.
- TRIM™ SC9030SGM is compatible with a very wide range of materials including: cast iron, nodular cast iron, steels as well as plastics and composites
- Provides excellent corrosion and rust inhibition on cast iron and other ferrous metals, preventing clinkering problems of cast iron chips in machining
- Keeps machines very clean and leaves a soft fluid film for easy cleaning and less machine maintenance
- Special prescription design, without fungus problems
- Excellent antibacterial performance prolongs coolant sump life efficiently. Extremely tight emulsion for low carryoff, very low coolant addition that reduces the cost for the user
- Low odor and mist that provides a good working environment
- Super hard-water tolerance, working solution keeps stable even with <680ppm water hardness. Nevertheless, we recommend our customers use pure, mineral-free (never softened) water to mix our product to maintain the performance of the working solution and reduce concentration usage
- Easy recycling or disposal with conventional techniques and equipment
|
|
TRIM™ OM 200A*
Straight Cutting Oil
RELEASED: 2009-09-01
|
|
|
TRIM™ OM 200A* is a high performance straight cutting oil designed for both ferrous and nonferrous metals. This product, containing extreme pressure additives and boundary lubricants, provides excellent performance on tough materials in low-speed, high-pressure machining. TRIM™ OM 200A* is a very effective lubricant for giving excellent finishes and tool life on a variety of metals.
- Nonstaining
- Light color
- Low ordor, low misting
- Very high lubricity for different operations such as gear shaping and broaching
|
|
TRIM™ E738
Magnesium Machining Emulsion
RELEASED: 2009-07-22
|
|
|
TRIM™ E738 is a revolutionary new cutting fluid for the machining of wrought and cast magnesium alloys. E737 is nitrite, triazine and phenol free and has extraordinary resistance to splitting of its emulsion.
- E738 is a magnesium specific fluid that practically eliminates the hydrogen generation, residue, and splitting issues associated with machining magnesium-based alloys with water- based fluids
- Low hydrogen generation means lower risk of fire than with other water based fluids or straight cutting oils
- Extreme hard water tolerant reduces fluid usage and residues
- Works very well on big chip operations on magnesium based alloys
- Extremely tight emulsion for superior wetting, great cooling, and low carryoff
- Prevents the formation of magnesium residues that present cleaning problems on both machines and parts
- Cleaner chips for easier recycling or increased resale value
- Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced machine maintenance costs
- Easily waste treated or disposed of using conventional techniques and equipment
|
|
TRIM™ E9010
RELEASED: 2009-07-22
|
|
|
TRIM™ E9010 was designed to have machining performance in cutting and grinding equivalent to the currently used soluble oils. New features of this improved product include higher alkalinity in dilution, improved sump life, particularly in hard water environment, and good corrosion protection. TRIM™ E705 has the capability to be used in multi-metal "jobbing" shops on ferrous, nonferrous and nonmetallic work.
- TRIM™ E705's formulation based on modern MWF chemistry
- Contains no nitrites, and no secondary aminies
- Contains no phenolics
- Formula does not contain sulpur or chlorine as EP Additives
- Requires no hazard labelling
|
|
TRIM™ VXX
Extreme Lubricity Emulsion
RELEASED: 2009-07-22
|
|
|
TRIM™ VXX is a soluble oil (chemical emulsion) coolant designed to do the heaviest duty machining operations. VXX is often used as a replacement for straight cutting and grinding oils. It contains very high levels of EP additives including stable chlorine and sulfur. Additional friction modifiers, including sulfurized fats and particle size modification technology, are used to reduce the mechanical friction seen in many heavy-duty machining and grinding operations.
- Even with all these EP additives and friction modifiers, VXX will not stain “white and yellow” metals
- Cools better than straight oil to allow higher metal removal rates without heat damage
- Contains a proven and highly effective extreme pressure (EP) additive to control built-up edge and prevent wheel loading and packing
- Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
- Coolant residue is easily removed with water, working solution or aqueous cleaners
- Easy recycling or disposal with conventional techniques and equipment
|
|
TRIM™ E709
Long-life Emulsion
RELEASED: 2008-12-01
|
|
|
TRIM™ E709 is high-quality, universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. The stable and predictable performance of E709 makes it a first choice for high-quality, consistent parts manufacturing.
- Very stable formula provides long operational life with consistent performance
- Extremely hard water tolerant
- Very wide application range, suitable for both grinding and machining
- Fine particle size emulsion reduces carryoff and facilitates getting the fluid to the point of cut
- In high-speed turning and milling, E709 has the right balance of cooling and lubrication to provide good tool life and surface finishes
- Compatible with aluminum, steel alloys, cast iron, and yellow metals
- Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
- Coolant is easily removed with water, working solution, or aqueous cleaners
- Easy recycling or disposal with conventional techniques and equipment
- Does not contain or test positive for phenol
- Will run effectively for long periods
without the need for costly additives
|
|
TRIM™ SC310
Microemulsion Semisynthetic
RELEASED: 2008-12-01
|
|
|
TRIM™ SC310 is a high-oil, semichemical coolant. This product combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine “friendliness” of a soluble oil. SC310 is
well-suited for general, high-speed machining and grinding of all materials.
- Compatible with a very wide range of material including: cast iron, steels, copper, and many plastics and composites
- Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron
- Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
- Has exceptional sump life and very low makeup for extremely low total operating cost
- Low odor and mist makes for an operator friendly product
- Extremely effective EP additive package
- Contains no nitrites, heavy metals, phenolic compounds
- Easy recycling or disposal with conventional techniques and equipment
|
|
Effectively Remove Oil from Coolants and Washing Solutions
RELEASED: 2008-05-21
|
|
|
 |
Tramp oil is a major source of problems associated with water miscible cutting and grinding fluids.
Tramp oil contributes to the growth and formation of:
- coolant-destroying bacteria
- undesirable residues on machine tools and workpieces
- smoke and oil mist in shop atmospheres
These problems result in:
- shortened coolant life
- poor material removal rates
- poor surface finish and size control
- decreased tool and wheel life
Numerous devices (“floating ropes,” wheels, and belts) have been developed over the years to remove “free floating“ tramp oil from the surface of coolant. While they have all worked to one degree or another, they generally have been either “troublesome,“ high maintenance, relatively ineffective, or able to operate only on limited liquid level fluctuations. To overcome the shortcomings of existing tramp oil skimming devices, Master Chemical has introduced the SCROUNGER® Oil Skimmer.
As a “belt-type” skimmer, these units are effective in removing floating oil from widely fluctuating liquid levels of coolants or parts washing solutions. The SCROUNGER® features a revolutionary new oleophilic belt and a totally new concept of stripping the separated oil from the belt. The SCROUNGER® Jr. uses the same “oil loving“ belt, but uses a more compact scraper blade to strip the separated oil from the belt.
FEATURES
- 115 volt, single phase, 50/60 Hz
- heavy-duty, impedence-protected, fan-cooled drive motor with hardened shaft and needle bearings (220 volt,
single phase, 50 Hz also available)
- open, accessible oil-collecting tray with a convenient drain connector
- “oil loving“ oleophilic belt (purchased separately)
- heavy-duty steel construction, with industrial-grade enamel paint
BENEFITS
- fast, simple belt changing
- low maintenance
- lower hang roller that will not fall off in the machine sump even in turbulent conditions
OPTIONS
- dewatering tray
- portable kit
- special length belts available on special order
- special belt materials available for high temperature or pH applications on special order
SCROUNGER® Jr. BELTS
- all belts 1” [25mm] wide
- 24” [610mm]
- 32” [815mm]
- 44” [1120mm]
|
|
|
|
