|
Home > Europe > Equipment Products 
|
Oil/Water Separators
Oil/Water Separators were developed by Master Chemical Corporation to extend coolant life and to reduce the harmful effects of tramp oil contamination on water miscible fluids such as poor tool life and finishes, corrosion, dermatitis, and fluid rancidity.
|
High-Speed, Disc-Bowl Centrifuges
For Tramp Oil Removal
|
|
|
Master Chemical Corporation has engineered tramp oil separator systems utilizing rugged, reliable centrifuges. Master Chemical's unique knowledge of both metalworking fluids and state-of-the-art centrifuges results in properly sized and engineered tramp oil removal systems.
The centrifuge package is designed and fabricated in Maumee, Ohio, and tailored to meet the specific needs of the customer. Master Chemical also has a complete, licensed service technical staff to perform start-up and service work.
Available with both solid-wall bowl centrifuges (manual) or with self-desludging bowl centrifuges (automatic).
|
|
|
|
The Master Coalescer II™ was developed by Master Chemical Corporation (the originators of coolant recycling) to meet the needs of any metalworking
plant for a simple, effective, low-cost tramp oil separator. The Master Coalescer II will process machine tool coolants to remove tramp oils and
fines and provide clean, reusable coolant.
Benefits:
- Extended coolant life
- Improved machining
- Longer tool life
- Low maintenance
- Portability allows shared use on several machine tool sumps
- Simplified operation - no flow rate adjustment with standard electric pump
- Can also be used on parts washing fluids
- Removes tramp oils while the machine tool is running
Features:
- Submersible pump is standrd with no flow rate adjustment required
- Pump is mounted in an enclosure on the end of the tank
- Easily removed oleophylic polypropylene coalescing plate pack with 111 square feet of coalescing area for maximum oil removal efficiency
- Tank drain valve for cleaning
- Adjustable feet for leveling purposes
- Adjustable oil removal weir pipe
- Lid on tank
- Floating oil collector to collect oils and dirty fluid
- Pre-pump strainer
- Optional casters
- Optional self-priming centrifugal pump for pumping from below ground sumps
- Optional 316 stainless steel tanks for high or low pH fluids
- Optional larger tank sizes and flow rates
- Optional 110 volt 50 hz and 220 volt 50 hz operation
|
|
Effective in removing oil from coolants and washing solutions
|
|
|
The SCROUNGER® Jr. features a revolutionary new oleophilic belt, but uses a more compact scraper blade to strip the separated oil from the belt.
coolant destroying bacteria
undesirable residues on machine tools and
workpieces
smoke and oil mist in shop atmospheres
The results of these problems are:
- shortened coolant life
- poor material removal rates
- poor surface finish and size control
- decreased tool and wheel life
Features:
- 115 volt/220 volt, single phase, 50/60 Hz
- Heavy-duty, impedence-protected, fan-cooled drive motor with a hardened shaft and needle bearings (220 volt, single phase, 50 Hz available also)
- Open, accessible oil collecting tray with a convenient drain connector
- Oleophilic, 'oil loving' belt
- Heavy-duty steel construction, with industrial-grade enamel paint
Benefits:
- Fast, simple belt changing
- Low maintenance
- Lower hang roller that will not fall off in the machine sump even in turbulent conditions
|
|
For Tramp Oil Removal
|
|
|
The SCROUNGER® features a revolutionary new oleophilic belt and a unique method of stripping the separated oil from the belt. The SCROUNGER® Jr. uses the same 'oil loving' belt, but uses a more compact scraper blade to strip the separated oil from the belt.
Features:
- 115 volt/220 volt, single phase, 50/60 Hz
- Heavy-duty, impedence-protected, fan-cooled drive motor with a hardened shaft and needle bearings (220 volt, single phase, 50 Hz available also)
- Open, accessible oil collecting tray with a convenient drain connector
- Oleophilic, 'oil loving' belt
- Heavy-duty steel construction, with industrial-grade enamel paint(SCROUNGER®) or a durable zinc coated finish (SCROUNGER® Jr.)
Benefits:
- Fast, simple belt changing
- Low maintenance
- Lower hang roller that will not fall off in the machine sump even in turbulent conditions
|
|
Sump Side Coalescer™
For Tramp Oil Removal
|
|
|
The Sump Side Coalescer™ is a small inexpensive coalescing unit designed for sump-side use. Flow rate is 1.5 U.S. gpm (5.6 lm).
Benefits:
- Removes tramp oil
- Superior surface
skimming capability
- Extended coolant
life
- Improved machining
- Improved tool
life
- Low maintenance
Features:
- 15 U.S. gallons
(56 liter) coalescing drum
- Unique adjustable
skimmer (adaptable to shallow sumps)
- Submersible pump
- Optional SCROUNGER®
Jr. Oil Skimmer, air pumps, larger electric pumps
|
|
Tramp Oil Terminator™ for Tramp Oil Removal
Portable Centrifuge Unit for Removing Emulsified Tramp Oils
|
|
|
The Tramp Oil Terminator™ was developed by Master Chemical Corporation (the originators of
coolant recycling) to meet the needs of the small metalworking plant for a compact, portable, high-speed centrifuge, tramp oil separator. The Tramp Oil Terminator will process both
water-miscible coolants and aqueous cleaners to remove free and emulsified tramp oils, providing clean and reusable coolants and cleaners.
Removing tramp oils (hydraulic oils, way lubes or any undesirable oil) from coolants and cleaners removes a food source for bacteria, reduces undesirable residues, and reduces smoke and
oil mist in the shop atmosphere.
Benefits:
- Extended life of coolants and cleaners
- Improved machining
- Longer tool life
Features:
- Compact and portable for machine tool sumps and parts washers
- Simple operation
- High-speed, disc-bowl centrifuge
- Stainless-steel hood and bowl
- Built-in clean fluid centripetal discharge pump
- Easy dismantling of bowl for cleaning
- Quick disconnects on feed and discharge
- Strainer and 50 micron cleanable pre-filter
- Air pump and floating skimmer for feed
- Automatic shut off when tramp oil collection tank is full
|
|
|
Aerospace
