|
Home > Europe > Fluid Products > Cleaners & Washing Compounds 
|
Spray
TRIM® spray cleaners clean faster for increased production in applications where the cleaning fluid is sprayed onto the parts. TRIM spray cleaners are low foaming and operate at low concentrations and lower temperatures, which increases your bottom line by reducing makeup and saving energy costs. TRIM spray cleaners provide corrosion inhibition and eliminate staining rejects.
|
 |
TRIM® CLEAN 2023
Washing Fluid for Aluminum and Multi-Metal Parts
|
|
|
TRIM® CLEAN 2023 “BIG AL” is a highly concentrated liquid parts washing compound/corrosion inhibitor for use in spray washers. This product is safe and effective on aluminum alloy and steel alloy parts, as well as cast iron. CLEAN 2023 “BIG AL” provides good detergency and long life for the removal of coolants, straight oils, corrosion inhibitors, and all types of metalworking fluids.
- Inhibits darkening or smutting of aluminum alloys even at elevated temperatures.
- Excellent choice for two or three-stage spray washers and can be used for washing steel, stainless, cast iron, titanium, and aluminum alloys
- Provides long bath life
- Environmental approvals are simplified because CLEAN 2023 “BIG AL” contains no nitrites, barium, phenols, or butyl cellosolve; this formula has very low VOC content and no SARA 313 reportable ingredients
- Low foaming for use in high-pressure spray washers above 120°F
- Typically provides up to one week in-process corrosion inhibition on ferrous parts if not rinsed.
|
|
TRIM® CLEAN 2029
Parts Washing Fluid with Corrosion Inhibitor
|
|
|
TRIM® CLEAN 2029 “One-Step” is a highly concentrated cleaner/corrosion inhibitor designed for spray washers and immersion tanks. This product will remove heavy soils and provide two to four weeks of indoor corrosion inhibition on steel and cast iron parts.
- CLEAN 2029 “One-Step” has been approved as a “Clean Air Solvent” by the California South Coast AQMD
- Will reliably provide one to two weeks of indoor corrosion inhibition on steel or cast iron parts if not rinsed
- Formulated without silicates or other high pH additives, CLEAN 2029 “One-Step” is compatible with ultrafiltration systems and bioremediation
- An excellent choice for cabinet-style spray washers and can be used for washing steel, stainless, cast iron, titanium, and many aluminum alloys
- Hard water tolerant, it provides long bath life
- Environmental approvals are simplified because CLEAN 2029 “One-Step” contains no nitrites, barium, phenols, or butyl cellosolve; this formula has very low VOC content and no SARA 313 reportable ingredients
- Low foaming for use in high-pressure spray washers with temperature above 125°F(52°
C)
|
|
TRIM® CLEAN 2115AL
Low Foam Spray Washing Compound
|
|
|
TRIM® CLEAN 2115AL is an aluminum compatible, high performance, low foam synthetic washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control and tramp oil rejection.
- Compatible with a wide range of materials including aluminum, cast iron, steels, zinc, plastics, and composites
- Resists foaming even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115AL an excellent choice where rapid buildup of coolant carryover creates a foam problem
- Many CLEAN 2115AL applications are in the range of 3,000 to 10,000 PSI (200 to 660 kPa)
- Provides short term corrosion inhibition on cast iron and ferrous alloys
|
|
|
Aerospace
