Home > Europe > News
TRIM® E720
Cutting and Grinding Fluid Concentrate
RELEASED: 2011-05-11
|
|
|
TRIM® E720 is a high quality, universal soluble oil with a broad application range in machining and grinding of a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the medium to heavy duty machining jobs on aluminium and stainless steel. The inhibitor package in TRIM E720 also makes it particularly suited to the machining of copper alloys without component staining or unsightly machine residues. The stable and predictable performance of TRIM E720 makes it a first choice for high-quality, consistent parts manufacturing.
- Very stable formula provides long operational life with consistent performance.
- Hard water tolerant.
- Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE).
- Fine soluble oil emulsion reduces carry-off for low total operating cost.
- Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion
prevention.
- Compatible with aluminium alloys, steel alloys, cast iron, yellow metals and plastics.
- Free from boron, amines and formaldehyde donor biocides.
- Will run effectively for long periods without the need for costly additives.
|
|
TRIM® SC412
Cutting and Grinding Fluid Concentrate
RELEASED: 2011-01-10
|
|
|
TRIM® SC412 is a cost effective, semi-synthetic coolant specifically formulated for machining and grinding of cast iron and steel. This formulation achieves the highest levels of ferrous rust protection whilst also maintaining low levels of foam even in soft water areas. This clean running formulation also prevents the loading of grinding wheels, ensuring good surface finishes and minimal burning.
- A very versatile product that works well in a wide range of operations such as grinding, milling, turning, drilling, and tapping.
- Extremely good product for cast iron and steel machining and grinding.
- Extremely fine emulsion reduces carry-off for low total operating cost.
- Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention.
- Extremely hard water tolerant.
- Easily recycled or disposed of without special handling or equipment.
- Contains no DEA, chlorine, nitrites or phenolic compounds
|
|
TRIM® C276WP
Cutting and Grinding Fluid Concentrate
RELEASED: 2010-10-01
|
|
|
TRIM® C276 WP is a chemical surface active or synthetic coolant concentrate designed to operate at very high fluid pressures and volumes with little or no foam. TRIM® C276 WP is ideally suited to situations where high coolant velocities or volumes are necessary to achieve maximum productivity. TRIM® C276 WP is designed to have the superior cooling and chip settling characteristics of a premium synthetic product with the improved residues and mechanical lubricity of a semi-synthetic coolant. This product utilises an extremely effective and proprietary non-chlorine, non-sulphur extreme pressure additive for good tool life and improved surface finishes.
- Very stable formula provides long operational life with consistent performance.
- Chlorine and sulphur free extreme pressure (EP)additives control built-up edge (BUE).
- Excellent choice for nickel alloy, steel alloy and cast iron machining and grinding.
- Extremely low foam in mineral free water.
- Excellent tramp oil rejection.
- Water clear dilution aids filterability, reduces carryoff and facilitates getting the fluid to the point of cut.
- Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures.
- Easy recycling or disposal with conventional techniques and equipment.
- Contains no DEA, chlorine, nitrites, formaldehyde donors or phenolic compounds
|
|
TRIM® E950
Cutting and Grinding Fluid Concentrate
RELEASED: 2010-03-02
|
|
|
TRIM® E950 is a proprietary blend of new vegetable-based technology and premium traditional lubricity additives to yield a very high performance, low management metal removal fluid. This premium emulsion product is operator friendly because of its mild contact nature and low chemical initial-charge odour. TRIM® E950 is robust enough to deliver extended useful life and avoid rancid odours normally associated with traditional emulsions. The unparalleled lubricity delivers exceptional surface finish and tool life on difficult to machine aluminium alloys, inconel, titanium, stainless and high tensile strength steels
- Delivers unparalleled lubricity.
- Very long sump life and low carry-off rates result in low operating cost.
- Low foam even in soft water areas.
- Hard water tolerant.
- Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE) in tough operations on aerospace materials.
- Fine emulsion ensures fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior tool life and corrosion prevention.
- Compatible with all materials excluding magnesium.
- Easily recycled or disposed of without special handling or equipment.
- Will run effectively for long periods without the need for costly additives.
|
|
TRIM® OM220 SCF
Chlorine & Sulphur Free Cutting Oil
RELEASED: 2010-01-27
|
|
|
TRIM® OM 220 SCF is a high quality neat cutting oil designed for general machining operations on both ferrous and non-ferrous alloys. TRIM® OM 220 SCF contains no sulphur or chlorine containing extreme pressure additives. The use of TRIM® OM 220 SCF ensures excellent tool life and surface finishes. TRIM® OM 220 SCF is safe for use on aluminium alloy and steel alloy parts as well as cast iron, copper, brass and bronze.
- Sulphur and chlorine free extreme-pressure additive package for efficient metal removal.
- Formulated to handle a variety of applications.
- Excellent compatibility with copper containing alloys.
- Has replaced dark, heavy active sulphur/chlorine oils in several operations whilst providing superior results in tool life.
- Excellent oxidative stability.
- Low odour and low misting.
|
|
TRIM® C117
Cutting and Grinding Fluid Concentrate
RELEASED: 2009-12-22
|
|
|
TRIM® C117 is a high-performance fully synthetic fluid for working cast iron and mild steels. State-of the-art technologies provide excellent cooling and chip settling, good tramp oil rejection and machine cleanliness while leaving a protective film on the machine tool.
- Compatible with a very wide range of materials including cast iron, steels, plastics and composites; and provides excellent corrosion inhibition on all ferrous alloys.
- Extremely low carry off for very low total operation costs.
- Very low foam and mist.
- Very low initial odour.
- Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts of your machine tools.
- Exceptional sump life and very good tramp oil rejection.
|
|
TRIM® OD 316
Heavy-duty Gun Drilling Oil
RELEASED: 2009-12-22
|
|
|
TRIM® OD316 is a highly formulated, semi-synthetic neat cutting oil designed for use in gun drilling applications. TRIM® OD316 has the necessary blend of EP additives and esters to maximize tool life as well as the correct viscosity and washability to flush the chips away from the cutting zone. The product is primarily designed for use on steel alloys and exotic aerospace alloys, however, it is also safe for use on aluminium, cast iron, copper, brass and bronze. TRIM® OD316 has proven itself in difficult operations on stainless steels and corrosion resistant aerospace alloys.
- A light coloured product which is very clean running.
- Low foaming and low misting for use in aggressive operations.
- High flash point.
- Oxidation inhibited for longer life.
- Excellent tool life properties.
- An outstanding product in gun drilling.
- Low odour.
|
|
TRIM® TEC™ OG108
Carbide Tool Grinding Oil
RELEASED: 2009-12-22
|
|
|
TRIM® TEC™ OG108 is a very high specification grinding oil formulated for carbide and HSS tool grinding operations. The product utilises a very highly refined hydrocracked base oil which ensures very low levels of mist and high flash point. OG108 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.
- Very highly refined base oil ensures low mist and high flash point.
- Good flushing properties keeps grinding wheels very clean.
- Excellent friction reducing properties ensures long wheel life.
- Excellent heat transferring properties. Excellent oxidation stability.
- Chlorine free and sulphur free.
- Highly filterable in pre-coat filter systems.
- Low foaming.
- No reaction with cobalt.
- Kind to machine components and elastomers.
- Light colour and low odour for good operator acceptance.
|
|
TRIM® SC415
Cutting and Grinding Fluid Concentrate
RELEASED: 2009-12-22
|
|
|
TRIM® SC415 is a lower foam, semi-synthetic coolant specifically formulated for machining and grinding of cast iron and steel. This unique formulation ensures low levels of foam not generally seen with other semi-synthetic products especially in soft water areas. This clean running formulation also prevents the loading of grinding wheels, ensuring good surface finishes and minimal burning.
- A very versatile product that works well in a wide range of operations such as grinding, milling, turning,drilling, and tapping.
- Extremely good product for cast iron and steel machining and grinding.
- Extremely fine emulsion reduces carry-off for low total operating cost.
- Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention.
- Extremely hard water tolerant.
- Easily recycled or disposed of without special handling or equipment.
- Contains no DEA, chlorine, nitrites or phenolic compounds.
|
|
TRIM® SC617
Cutting and Grinding Fluid Concentrate
RELEASED: 2009-12-22
|
|
|
TRIM® SC617 is a semi-synthetic concentrate designed as a general purpose multi-metal coolant for general machining of ferrous and non-ferrous materials. TRIM® SC617 uses a proven EP additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics for superior turning, milling and grinding results. It also has sufficient lubrication for most “down-the-hole” operations on machining centers even on softer, more gummy materials like aluminium.
- A very versatile product that works well in a wide range of operations such as grinding, sawing, milling, turning, drilling, and tapping.
- Extremely good product for cast iron, steel and stainless steel machining and grinding.
- Low foam profile enables use in through tool machining applications.
- Very fine emulsion reduces carry-off for low total operating cost.
- Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention.
- Extremely hard water tolerant.
- Excellent tramp oil rejection together with highly biostable formulation ensures very long sump life.
- Contains no DEA, nitrites or phenolic compounds.
|
|
TRIM® OG223
Medium to Heavy Duty Neat Grinding Oil
RELEASED: 2009-11-24
|
|
|
TRIM® OG 223 is a medium to heavy-duty neat grinding oil. TRIM® OG 223 is designed for use in grinding operations of hardened steel alloys, tool steels, stainless steels, inconels and titanium. TRIM® OG 223 is formulated to comply with aerospace regulations, i.e. no chlorine and no active sulphur additives. TRIM® OG 223 can also be used to machine all materials, including yellow metals, in high pressure applications where low oil mist is advantageous.
- Excellent extreme-pressure additive package for efficient metal removal.
- Chlorine and active sulphur free.
- Excellent filterability in precoat filter systems.
- Hydrocracked base oil ensures very low misting potential.
- Very High flash point.
- Low foaming.
- Excellent oxidation stability.
- Excellent compatibility with copper containing alloys.
- Light colour and low odour for good operator acceptance.
|
|
TRIM® E715
Cutting and Grinding Fluid Concentrate
RELEASED: 2009-08-24
|
|
|
TRIM® E715 is a high quality, universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the medium to high duty machining and grinding jobs. The stable and predictable performance of TRIM® E715 makes it a first choice for high-quality, consistent parts manufacturing.
- Very stable formula provides long operational life with consistent performance.
- Formaldehyde donor biocide free.
- Extremely hard water tolerant.
- Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge(BUE.
- Extremely fine soluble oil emulsion reduces carryoff for low total operating cost.
- Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention.
- Compatible with aluminium alloys, steel alloys, cast iron and yellow metals.
- Easily recycled or disposed of without special handling or equipment.
- Will run effectively for long periods without the need for costly additives.
|
|
TRIM® E909
Cutting and Grinding Fluid Concentrate
RELEASED: 2009-07-20
|
|
|
TRIM® E909 is a high lubricity universal soluble oil which requires minimal maintenance in even the most
demanding fluid management systems. TRIM® E909 has broad application in machining and grinding of a
broad range of materials. The high levels of both chemical and mechanical lubricity in this product handle the
tough machining and grinding jobs. The stable and predictable performance of TRIM® E909 makes it a first
choice for high quality, consistent parts manufacturing.
- A very universal product that works well in a wide range of operations.
- Compatible with aluminium, all steels, yellow metals and cast iron.
- Tried and tested extreme pressure (EP) additive controls built-up edge in tough operations.
- Hard water tolerant.
- Low foam even at high pressures.
- Fine soluble oil emulsion reduces carry-off for low total operating cost.
- Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion
prevention.
- Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures.
- Easily recycled or disposed of without special handling or equipment.
|
|
TRIM® VHP® E820
Cutting and Grinding FLuid Concentrate
RELEASED: 2009-07-20
|
|
|
VHP® E820 is an aerospace approved, low to no foam chlorine free soluble oil. It is ideally suited for those
operations that utilize high-pressure, high-volume coolant. VHP® E820 is a fluid that will allow you to get
maximum benefits from high velocity through-the-tool coolant delivery systems on VMCs and HMCs and will
assist in achieving maximum productivity from creep feed and VIPER grinders. While VHP® E820 is very stable
and operator “friendly”, its greatest strength comes from its ability to help you get the job done. It is compatible
will all metals and many non-metallic materials as well. Even with a product as “gutsy” as VHP® E820 it will run
for extended periods of time without additives and do so in a very clean manner.
- A very versatile product that works well in a wide range of operations such as production, creep feed
grinding and milling, turning, drilling, and tapping
- Proven performer in difficult creep feed grinding operations
- Fine soluble oil emulsion reduces carry-off for low total operating cost
- Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion
prevention
- Very low foam, without the use of conventional defoamers
- Easily recycled or disposed of without special handling or equipment
- Contains no DEA, boron, chlorine, nitrites, formaldehyde donors, or phenolic compounds
|
|
TRIM® C272
Cutting and Grinding Fluid Concentrate
RELEASED: 2009-04-01
|
|
|
TRIM® C272 is a chemical surface active or synthetic coolant concentrate designed to operate at very high fluid pressures and volumes with little or no foam. TRIM® C272 is ideally suited to situations where high coolant velocities or volumes are necessary to achieve maximum productivity. TRIM® C272 is designed to have the superior cooling and chip settling characteristics of a premium synthetic product with the improved residues and mechanical lubricity of a semi-synthetic coolant. This product utilises an extremely effective and proprietary non-chlorine, non-sulphur extreme pressure additive for good tool life and improved surface finishes
- Very stable formula provides long operational life with consistent performance.
- Chlorine and sulphur free extreme pressure (EP) additives control built-up edge (BUE).
- Excellent choice for nickel alloy, steel alloy and cast iron machining and grinding.
- Extremely low foam in mineral free water.
- Excellent tramp oil rejection.
- Water clear dilution aids filterability, reduces carryoff and facilitates getting the fluid to the point of cut.
- Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures.
- Easy recycling or disposal with conventional techniques and equipment.
- Contains no DEA, boron, chlorine, formaldehyde donors, nitrites or phenolic compounds
|
|
Clean Tower
Highly efficient oil filtration system
RELEASED: 2008-09-26
|
|
|
Are you looking to reduce your oil consumption?
Are you looking to increase your productivity by improving the condition of your oils?
Are you interested in significant savings by purifying and extending the life of your oils?
Then we can offer a simple, highly efficient and proven oil filtration system for your general oil purification needs. The filtration unit, Clean Tower, would be a very efficient addition to your existing filtration systems and with its compact size and mobility can be shifted around the manufacturing plant with ease. Even though the unit is highly efficient in purifying down to 3 micron and very reliable, it is surprisingly inexpensive. In fact, the Clean Tower can compete, very successfully, against complex filtration systems, given its’ overall performance and price.
- Filtration down to 3-5 micron
- Small footprint
- Significantly lower capital cost
- Portable
- Relatively low energy consumption
- Simple design
- Ease of attaching to existing filter systems
- Dirty cartridges can be sold onto metal recylcers
|
|
Effectively Remove Oil from Coolants and Washing Solutions
RELEASED: 2008-05-21
|
|
|
 |
Tramp oil is a major source of problems associated with water miscible cutting and grinding fluids.
Tramp oil contributes to the growth and formation of:
- coolant-destroying bacteria
- undesirable residues on machine tools and workpieces
- smoke and oil mist in shop atmospheres
These problems result in:
- shortened coolant life
- poor material removal rates
- poor surface finish and size control
- decreased tool and wheel life
Numerous devices (“floating ropes,” wheels, and belts) have been developed over the years to remove “free floating“ tramp oil from the surface of coolant. While they have all worked to one degree or another, they generally have been either “troublesome,“ high maintenance, relatively ineffective, or able to operate only on limited liquid level fluctuations. To overcome the shortcomings of existing tramp oil skimming devices, Master Chemical has introduced the SCROUNGER® Oil Skimmer.
As a “belt-type” skimmer, these units are effective in removing floating oil from widely fluctuating liquid levels of coolants or parts washing solutions. The SCROUNGER® features a revolutionary new oleophilic belt and a totally new concept of stripping the separated oil from the belt. The SCROUNGER® Jr. uses the same “oil loving“ belt, but uses a more compact scraper blade to strip the separated oil from the belt.
FEATURES
- 115 volt, single phase, 50/60 Hz
- heavy-duty, impedence-protected, fan-cooled drive motor with hardened shaft and needle bearings (220 volt,
single phase, 50 Hz also available)
- open, accessible oil-collecting tray with a convenient drain connector
- “oil loving“ oleophilic belt (purchased separately)
- heavy-duty steel construction, with industrial-grade enamel paint
BENEFITS
- fast, simple belt changing
- low maintenance
- lower hang roller that will not fall off in the machine sump even in turbulent conditions
OPTIONS
- dewatering tray
- portable kit
- special length belts available on special order
- special belt materials available for high temperature or pH applications on special order
SCROUNGER® Jr. BELTS
- all belts 1” [25mm] wide
- 24” [610mm]
- 32” [815mm]
- 44” [1120mm]
|
|
TRIM® E925
Cutting and Grinding Fluid Concentrate
RELEASED: 2008-03-19
|
|
|
TRIM® E925 is a revolutionary hybrid soluble oil based on a unique blend of mineral oil based and vegetable ester based additives. Vegetable ester technology gives TRIM E925 extremely high cutting performance without using traditional chlorinated or sulphurised EP additives. This “green” environmental profile is further enhanced by the fact that TRIM E925 does not contain boron or formaldehyde donor compounds. TRIM E925 is a proven, superior product for machining high strength steels, stainless steels, aluminium and corrosion resistant aerospace alloys.
- Extremely high levels of lubrication without chlorinated or sulphurised EP additives.
- Compatible with aluminium, all steels, yellow metals and cast iron.
- Extremely hard water tolerant.
- Low foam even at high pressures.
- Fine soluble oil emulsion reduces carry-off for low total operating cost.
- Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion
prevention.
- No aggressive biocides.
- Easily recycled or disposed of without special handling or equipment.
- Contains no DEA, boron, chlorine, sulphur, nitrites, formaldehyde donors, or phenolic compounds.
|
|
All Purpose Cleaner PMC 1455-11
RELEASED: 2008-03-10
|
|
|
Task2™ All Purpose Cleaner is an industrial strength, water-based cleaning agent that does an outstanding job in the industrial environment for cleaning a variety of shop soils from all common surfaces. Task2 out-cleans all the green, crystal, purple, and blue butyl-based products you may have tried in the past.
- Has been proven to clean shop soils off of surfaces better than the “leading national product” of this type
- Contains no “Butyl”, and also has very low V.O.C. content
- Environmentally friendly, biodegradable, and contains no caustic, silicates, phosphates, nitrites, phenols, or borates
- Safe on all metals and most surfaces at room temperature
- Has very low conductivity and pH and will not harm TRIM® metalworking fluids
- Task2 All Purpose Cleaner is nontoxic
|
|
Glass Cleaner PMC 1406-41
RELEASED: 2008-03-10
|
|
|
Task2™ Glass Cleaner is an industrial strength, water-based cleaning agent that does an outstanding job in the industrial environment for cleaning machine tool glass and other hard surfaces.
- Has been proven to clean shop soils off of glass and plastic surfaces better than the “leading national product” of this type
- Contains no “Butyl”, and also has very low V.O.C. content
- Environmentally friendly, biodegradable, and contains no ammonia, caustic, silicates, phosphates, nitrites, phenols, or borates
- Safe on all metals and most surfaces at room temperature
- Has very low conductivity and pH and will not harm TRIM® metalworking fluids
- Great on glass, ceramics, stainless steel, chrome, Formica, and much more
- Residue–free formula
- Strong enough to cut through tough shop soils
|
|
|
|
