|
Home > North America > Fluid Products > Cleaners & Washing Compounds 
|
Immersion
TRIM® immersion cleaners use effective chemical action to clean parts that are immersed in a washing bath. TRIM immersion cleaners operate at low concentrations, and lower temperatures, which increases your bottom line by reducing makeup and saving energy costs. TRIM immersion cleaners provide corrosion inhibition and eliminate staining rejects. TRIM Ultrasonic cleaners provide faster cleaning, eliminate staining rejects, and clean at lower temperatures.
|
 |
TRIM® CLEAN 2017
Economical Heavy-duty Spray Cleaner
|
|
|
TRIM® CLEAN 2017 is an economical heavy-duty spray cleaner that removes heavy soils and oily residues from ferrous and magnesium parts. Often used in rebuild operations and for cleaning up cast iron, stamped or drawn steel parts, or removing heavy RP coatings.
- Very economical way to remove heavy soils and light rust
- Low foaming at ambient temperatures, and even lower when used above 120°F (49˚C)
- Can be recycled using XYBEX® equipment
- Contains no solvents, borates, silicates, nitrites, or amines
- Long bath life
- Excellent compatibility with magnesium
- Will prevent flash rusting and provide one-to-two days of in-process corrosion inhibition if not rinsed
|
|
TRIM® CLEAN 2020
Washing Compound for Ultrasonic and Immersion Washers
|
|
|
TRIM® CLEAN 2020 is a concentrated, very high performance cleaner made for washing all metals including brass, copper alloy, and aluminum in ultrasonic or immersion washers. Its cleaning ability is extraordinary, which often leads to shorter cleaning cycles or elimination of cleaning steps. CLEAN 2020’s oil rejecting properties mean longer bath life and economical operation.
- Excellent cleaning in immersion and ultrasonic tanks
- Long life because oils split rapidly to the surface of your cleaner tank where they can be skimmed off
- An excellent choice where one product is used for multiple purposes; such as washing mixed batches of ferrous, aluminum, and copper alloy parts
- Will provide extended in-process tarnish resistance on copper and copper alloy parts
- Safe on aluminum, aluminum alloy, and magnesium
- Contains no borates, phenols or nitrites, no SARA 313 or EPA 33/50 listed ingredients, and contains no butyl cellusolve
- Will remove coolant residues as well as straight oils
|
|
TRIM® CLEAN 2023 “Big Al”
Washing Fluid for Aluminum and Multi-Metal Parts
|
|
|
TRIM® CLEAN 2023 “Big Al” is a highly concentrated liquid parts washing compound/corrosion inhibitor for use in spray washers. This product is safe and effective on aluminum alloy and steel alloy parts, as well as cast iron. CLEAN 2023 “Big Al” provides good detergency and long life for the removal of coolants, straight oils, corrosion inhibitors, and all types of metalworking fluids.
- Inhibits darkening or smutting of aluminum alloys even at elevated temperatures
- Excellent choice for two or three-stage spray washers and can be used for washing steel, stainless, cast iron, titanium, and aluminum alloys
- Provides long bath life
- Environmental approvals are simplified because CLEAN 2023 “Big Al” contains no nitrites, barium, phenols, or butyl cellosolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
- Low foaming for use in high-pressure spray washers above 120F
- Typically provides up to one week in-process corrosion inhibition on ferrous parts if not rinsed
|
|
TRIM® CLEAN 2029 “One Step”
Parts Washing Fluid with Corrosion Inhibitor
|
|
|
TRIM® CLEAN 2029 “One Step” is a highly concentrated cleaner/corrosion inhibitor designed for spray washers and immersion tanks. This product will remove heavy soils and provide two-to-four weeks of indoor corrosion inhibition on steel and cast iron parts.
- CLEAN 2029 “One Step” has been approved as a “Clean Air Solvent” by the California South Coast AQMD
- Formulated without silicates or other high pH additives, CLEAN 2029 “One Step” is compatible with ultrafiltration systems and bioremediation
- An excellent choice for cabinet-style spray washers and can be used for washing steel, stainless, cast iron, titanium, and many aluminum alloys
- Hard water tolerant, it provides long bath life
- Environmental approvals are simplified because CLEAN 2029 “One Step” contains no nitrites, barium, phenols, or butyl cellusolve; this formula has very low VOC content and no SARA 313 reportable ingredients
- Low foaming for use in high-pressure spray washers with temperature above 125F (52C)
|
|
TRIM® CLEAN 2030
Cleaner/Corrosion Inhibitor for Ultrasonic and Immersion Washers
|
|
|
TRIM® CLEAN 2030 is a concentrated, very high-performance cleaner made for washing iron and steel parts and applying a short-term corrosion inhibitor in single-stage ultrasonic or immersion washers. Its cleaning ability is extraordinary which often leads to shorter cleaning cycles or elimination of cleaning steps. CLEAN 2030’s oil- rejecting properties mean longer bath life and economical operation. CLEAN 2030 can also wash most other metals including brass, copper alloy, aluminum, zinc, and magnesium.
- Excellent cleaning in immersion and ultrasonic tanks
- Long life because oils split rapidly to the surface of your cleaner tank where they can be skimmed off
- An excellent choice where one product is used for multiple purposes, such as washing mixed batches of ferrous, aluminum, and copper alloy parts in a single-stage washer.
- Will provide one-to-two weeks’ indoor rust inhibition on iron and steel, as well as in-process tarnish resistance on copper and copper alloy parts
- Contains no borates, phosphates, phenols, or nitrites, and no SARA 313-listed ingredients
- Will remove coolant residues as well as straight oils
•Also very compatible with magnesium and zinc
|
|
TRIM® RINSE 100
Washing Compound Concentrate
|
|
|
TRIM® RINSE 100 is a washing compound concentrate that does a great job of removing metalworking fluids and light oily films. This product will not stain ferrous or nonferrous materials and leaves an extremely thin film corrosion inhibitor, which does not interfere with gauging of parts. RINSE 100 is compatible with the TRIM® family of cutting and grinding fluid concentrates.
- Compatible with all aluminum, magnesium, copper alloys, steel and cast iron
- An effective machine cleaner and also a great product for general cleaning of loose tools and parts
- An excellent product for use in ultrasonic cleaner systems, as well as immersion washers
- Provides up to one week or more of in-process corrosion inhibition on ferrous parts
|
|
TRIM®
Machine Tool Sump and System Cleaner
|
|
|
TRIM® Whamex™ is a safe, fast-acting concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM® metalworking fluids when used as directed.
- A very specialized formula that draws on Master Chemical’s knowledge of coolant formulation and many years of hands-on experience in machine cleanouts
- Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas - getting rid of these residues is one of the best ways to extend coolant life in your system
- Very hard water tolerant allowing it to be effective in raw water or used coolant
- Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low VOC content and no SARA 313 reportable ingredients
- When used as directed below, this product is compatible with TRIM® brand synthetic, semisynthetic and soluble oil coolants, as well as most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won’t leave a slippery residue
- Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways
|
|
|
Aerospace
