Notice: Undefined index: productid in /usr/local/apache2/htdocs/na_en/fluid_products/ctgf/show_product.php on line 4 Corrosion Inhibitors - Master Chemical Corporation.
BUSAN® 77 is a cationic polymeric microbicide registered for use in metalworking fluids. This product should be used in accordance with the label instructions only. BUSAN® is the registered trademark of the Buckman Laboratories, Inc.
CL-1 Titration Kit Titration Kit for TRIM® Products
Master Chemical titration kit CL-1 is used to check the concentration of TRIM® aqueous cleaners and corrosion inhibitors.
CL-1 kit includes:
Carrying case and instructions
15 mL dropper bottle of Methyl Orange indicator (Indicator B)
15 mL dropper bottle of Phenolphthalein indicator (Indicator A)
15 mL dropper bottles of Sulfuric Acid (titrant)
29 mL mixing jar
5.83 mL measuring vial
GROTAN® Biocide
GROTAN® is a broad spectrum bactericide registered for use in metalworking fluids. It should only be used in accordance with the label instructions. GROTAN® is a registered trademark of the TROY Corporation.
KATHON® 886 MW Biocide
KATHON 886 MW® is a broad spectrum biocide/fungicide registered for use in metalworking fluids. This product contains 14% active ingredients and is not normally recommended for use in systems smaller than 500 gallons. It should only be used in accordance with the label instructions. KATHON 886 MW®
is a registered trademark of the Rohm and Haas Corporation.
KATHON® 893 MW Fungicide
KATHON 893 MW® is a fungicide registered for use in metalworking fluids. This product should be used only in accordance with the label instructions. KATHON 893 MW® is a registered trademark of the Rohm and Haas Corporation.
Dual-Ratio, Dual-Product Dispenser for TRIM® CLEAN Products
The Skrambler2™ is a rugged, industrial grade, dual-ratio mixer made for dispensing TRIM® CLEAN products.
Advantages:
Dual 3.5 gpm air gap eductor proportioners can dispense one or two products at different ratios
Heavy-duty, stainless steel cabinet protects the nozzles and connections
The patented air gap eductors meet the ANSI A112.1.2 Standard for back-flow prevention
All components of the Skrambler2 are highly chemical resistant and compatible with the full line of TRIM®
CLEAN maintenance cleaner products
The Skrambler2 is easy to install and use
An assortment of insert tips provide for mix ratios from 22% down to .5%
sodium OMADINE® Fungicide
Sodium OMADINE® is a broad spectrum fungicide registered for use with metalworking fluids. This product should be used in accordance with the label instructions only. OMADINE® is a registered trademark of Arch Chemical, Inc.
Foaming Applicator for TRIM® CLEAN Products
The Whammer™ is a simple, durable, low-cost foaming dispenser for TRIM® CLEAN maintenance cleaners.
The Whammer will produce a foaming spray stream of TRIM® cleaner for cleaning the surfaces of machine tools or large clean-in-place parts
Cleaner concentration is easily adjusted with replaceable nozzles (included) from about .5% to 6%
Foamed cleaner goes further, and the foam helps you keep track of where product has been sprayed
The Whammer is resistant to all TRIM® CLEAN maintenance cleaner concentrates
Simple construction makes it easy to clean and use
TRIM SOL® General-purpose Emulsion
TRIM SOL® is a soluble oil (emulsion) coolant concentrate which is the world standard general-purpose multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and “guts” necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.
Proven to be highly effective in controlling built-up edge (BUE)
Has a very wide application range and is often used in such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
Leaves a fluid, nongumming film to prevent sticky ways, chucks, tool holders, and fixtures
Coolant residue is easily removed with either water, working solution, or aqueous cleaners
Easy recycling or disposal with conventional techniques and equipment
TRIM SOL® LC sf General-purose Emulsion-Nonchlorinated, Siloxane Free
TRIM SOL® LC is a siloxane-free chemical emulsion or soluble oil coolant concentrate designed for light and moderate machining and grinding. This product is designed for a wide variety of metal removal operations on most ferrous metals and many nonferrous metals, such as brass, copper, and aluminum. This product is particularly effective in situations where reactive alloying agents like lead (Pb) are present.
For wide range job applications from tough assignments such as gear hobbing and broaching to lighter duties like turning, TRIM SOL® LC has proven equally effective
Does not contain any chlorinated EP additives
Easily adaptable to nonferrous and ferrous metals
Stability - TRIM SOL® LC forms an extremely tight emulsion of fine particle size and can be run for extended periods without pumpouts
Housekeeping is easy with TRIM SOL® LC's built-in cleaning action - metal chips and dirt will not build up; therefore, machines stay clean
Fluid residue prohibits sticky ways and slides which is a very important consideration in the operation of automatic and numerically controlled machines
Coolant residue is easily removed with water, working solution or aqueous cleaners
Easy recycling or disposal with conventional techniques and equipment
TRIM SOL® nd General-purpose Emulsion - No Dye
Same as TRIM SOL® but without the dye.
TRIM SOL® ndsf General-purpose Emulsion - No Dye, Siloxane Free
Same as TRIM SOL® but without dye and siloxane-free.
TRIM SOL® sf General-purpose Emulsion - Siloxane Free
The industry standard when it comes to general purpose soluble oil coolants. TRIM SOL® has the broadest applications spectrum of any coolant in the marketplace today. Its performance has been proven over time in grinding, gear hobbing, turning, drilling, milling, and replacing oils on some screw machines. TRIM SOL®
will do it all.
Siloxane free
Has sufficient EP additives and mechanical lubricity to do most machining that can be done with a water soluble
Easy on both operators and machines because of low operating pH and an oily fluid residue
Superior sump life
Easily recycled or disposed
Contains no nitrites
TRIM® 229 Corrosion-inhibiting Synthetic
TRIM® 229 is a synthetic coolant that delivers maximum chemical corrosion inhibition on ferrous materials with no residual film and at the lowest possible cost. TRIM® 229 is often used in surface grinding where maximum cooling and minimum foam are desirable. TRIM® 229 is also used in other situations including: water tables on plasma torches, leak detection dip tanks, abrasive cut off machines and water jet cutting systems.
Highly concentrated for very low cost working solutions
Keeps grinding wheels clean and the work piece cool
Rapidly settles fines
Operators like TRIM® 229’s nonfoaming, low mist, and low odor working solutions
Very low residue for easy cleaning
Provides good corrosion inhibition on all common ferrous materials
Rejects tramp oil for easy skimming and cleaning
Easy recycling or disposal with conventional techniques and equipment
TRIM® 9106 Synthetic
TRIM® 9106 is a clear, virtually odorless, synthetic coolant with excellent heat dissipating and corrosion inhibiting qualities. This product is recommended for grinding operations on cast iron, aluminum, and steels. TRIM® 9106 will not form ammonia when grinding cast iron and allows graphite to float and prevents swarf from clinkering when grinding cast iron. TRIM® 9106 contains no sulfur, phosphorus, chlorine, or other halogens.
Very operator, machine, and environmentally friendly
Moderate pH
Contains no biocides, no oil, and no halogens
Will not form ammonia or other gases when grinding or machining cast iron
Inhibits chip packing and clinkering
Operators like 9106’s very low odor, low foam, low mist, and clear working solution
Compatible with brass, aluminum, and lead serrations on magnetic grinding chucks
Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
Very low carryoff for extremely low fluid operating costs
Easy recycling or disposal with conventional techniques and equipment
TRIM® C115 Synthetic
TRIM® C115 is a high-performance synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.
Compatible with a very wide range of materials including cast iron, steels, plastics, and composites
Does an excellent job in most glass, ceramic, and composite grinding applications
Excellent corrosion inhibition on most common ferrous and nonferrous alloys
Extremely low carryoff keeps operating costs down
Low foam and mist
Very low initial odor level which usually disappears after one to two days
Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
Exceptional sump life and very good tramp oil rejection
TRIM® C210 Cutting and Grinding Fluid Concentrate
TRIM® C210 is a chemical surface active or synthetic coolant concentrate designed to meet or exceed the chemical approval requirement in most medical, nuclear, and aerospace operations. C210 provides a combination of cooling and lubrication properties to facilitate the cost-effective production of high volume, high value parts in the most stringent chemical environments.
C210 is compatible with a very wide range of materials including: steels, aluminum and copper alloys, as well as most plastics and composites
Has the EP lubricity to do form grinding, drilling, tapping, and reaming operations without the need for chlorine or sulfur based EP additives
Has extremely low carryoff for very low total operation costs
Has very low foam and mist
Has a very low, initial odor level which usually disappears after use for one to two days
Will keep your machines clean while leaving a soft, fluid residue that protects the bare metal parts of your machine tools
Has exceptional sump life and very good tramp oil rejection
TRIM® C270 High-performance Synthetic
TRIM® C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
C270 is compatible with a very wide range of materials including: cast iron, steels and copper alloys, as well as plastics and composites
Provides excellent corrosion inhibition on all common ferrous and nonferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
A very low initial odor level which usually disappears after one to two days
TRIM® C270 bd High-performance Synthetic - Blue Dye
Same as TRIM® C270 but with a blue dye.
TRIM® C270 bd is a state-of-the-art synthetic coolant. C270 bd provides excellent cooling and chip settling, good
tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium
synthetic coolant for virtually all machining operations.
C270 bd is compatible with a very wide range of materials including: cast iron, steels and copper alloys as well as plastics and composites
Provides excellent corrosion inhibition on all common ferrous and nonferrous alloys
Does a great job in form grinding, drilling, tapping and reaming operations without chlorine or sulfur based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
A very low initial odor level which usually disappears after 1-2 days
TRIM® C270CG High-performance Synthetic
TRIM® C270CG is a state-of-the-art synthetic coolant. C270CG provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
C270CG is compatible with a very wide range of materials including: cast iron, steels and copper alloys as well as plastics and composites
Provides excellent corrosion inhibition on all common ferrous and nonferrous alloys
Does a great job in form grinding, drilling, tapping and reaming operations without chlorine or sulfur based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the build-up of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
A very low initial odor which usually disappears after one to two days
TRIM® C270CG bd High-performance Synthetic - Blue Dye
TRIM® C270CG bd is a state-of-the-art synthetic coolant. C270CG bd provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
C270CG bd is compatible with a very wide range of materials including: cast iron, steels and copper alloys as well as plastics and composites
Provides excellent corrosion inhibition on all common ferrous and nonferrous alloys
Does a great job in form grinding, drilling, tapping and reaming operations without chlorine or sulfur based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the build-up of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
A very low initial odor which usually disappears after one to two days
TRIM® C275 Synthetic
TRIM® C275 is a synthetic coolant that excels where the primary operations are high-speed turning and milling on ferrous metals. New nonchlorinated technology insures maximum performance and compliance with the most demanding environmental standards, high levels of cooling, and control of chip welding and built-up edge. C275 has the mechanical lubricity previously found only in high oil semisynthetics. This increased mechanical lubricity facilitates tapping and reaming operations in some materials. C275 provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness while leaving a fluid, resoluble protective film.
Compatible with a very wide range of materials including cast iron, steels, copper alloys, plastics and composites
Provides excellent corrosion inhibition on all common ferrous and nonferrous alloys
Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, tapping and reaming operations without the need for chlorine or sulfur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Very low initial odor level which usually disappears after one-to-two days
Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools. This film is easily washed off with coolant working solution for easy machine cleaning
Minimizes the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
TRIM® C276 Clean-running Synthetic
TRIM® C276 is synthetic coolant that meets the needs of the most modern and demanding manufacturers. C276 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that is clean running, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.
Compatible with a very wide range of materials including cast iron, steels, copper alloys, plastics, and composites
Very low foam and mist
Provides excellent corrosion inhibition on all common ferrous and nonferrous alloys
Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, tapping, and reaming operations without the need for chlorine or sulfur-based EP additives
Extremely low carryoff for very low total operation costs
Exceptional sump life and very good tramp oil rejection
Very low initial odor level which usually disappears after one to two days
Minimizes the buildup of sticky residues
TRIM® C320 High-lubricity Synthetic
TRIM® C320 is a high lubricity, low foam, synthetic coolant that approaches the “down-the-hole” machining performance of premium soluble oils. This product is exceptionally good on aluminum. Even with its very high performance, C320 meets or exceeds most stringent environmental standards.
Excellent extreme pressure (EP) lubricity to do many drilling, tapping, reaming, and form-grinding operations without any chlorine or sulfur-based EP additives
A very versatile product which works well in mixed metal situations including aluminum, steel alloy, cast iron, and copper alloy
Provides good corrosion inhibition on all common ferrous and nonferrous alloys
Keeps grinding wheels clean and sharp for higher “G ratios”, better surface integrity, and faster stock removal
Contains no DEA, nitrides, phenolic compounds, “formaldehyde releasers”, or chlorine
Operators like C320’s very low odor, low foam, low mist, and pale-yellow working solution
Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts
Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
Exceptional sump life, great resistance to fungus and bacteria, and good tramp oil rejection
C320 is a super product for aluminum wheel machining
TRIM® C350 Premium Synthetic Metalworking Fluid
TRIM® C350 is a synthetic or chemical coolant optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology an nonchlorinated EP package produce very high levels of usable lubricity at the point of cut. C350’s unique chemical formula allows superior, nonferrous corrosion prevention particularly on aero space aluminum alloys.
Meets the most stringent nuclear and aerospace chemical content and machining requirements
Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, inconel, brass, and high strength alloy steels
Water clear, low foaming and misting C350 is a joy to work with and manage
Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
Easily removed from parts for easy cleanup before assembly, painting, or plating operations
PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
Very low carryoff and long sump life results in low operating cost
TRIM® C380 Premium Ferrous Machining Synthetic
TRIM® C380 is a premium, synthetic, metalworking fluid optimized for high-tech ferrous materials including stainless steel and Inconel® which are widely used in aerospace, medical, and the electronics industries. C380 uses the best of the new ester technology to yield a very-high performance, easy-to-use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonhalogenated EP package produce very high levels of usable lubricity at the point of cut. C380 utilizes unique low-foam detergents to keep process soils from redepositing on machines and parts.
Ease of maintenance, low carryoff, and long sump life result in low operating cost
Water white, low foaming, low odor, and low mist creates a clean manufacturing environment
High performance in a wide range of operations from general grinding to heavy-duty machining
Superior resistance to corrosion on ferrous materials including, titanium, Inconel, and high strength alloy steels
Easily removed from parts for easy cleanup before assembly, painting, or plating operations
Product readily rejects process oils such as hydraulic and way oils
Excellent surface finish in finish-grinding operations
PRTR compliant, no SARA 313 reportable chemistry.
Product contains no chlorine, phenol, nitrites, copper, triazine, silicone, or phosphorous
TRIM® CE/CE2 nd Multi-metal Emulsion
TRIM® CE/CE2 soluble oil coolant concentrate is a well-proven, general-purpose multi-metal coolant for machining ferrous and nonferrous materials. It has the lubricity and “guts” necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.
Contains a proven highly effective extreme pressure (EP) additive to control built-up edge (B.U.E.)
Uses a nonphenolic emulsion stabilizer system and does not test positive on the 2 AAP test
Has a very wide application range for use on such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing and replacing straight oil on some types of screw machines
Leaves a soft, nongumming residue to prevent sticky ways, chucks, tool holders and fixtures
Coolant residue is easily removed with water, coolant working solution or aqueous cleaners
Easy recycling or disposal with conventional techniques and equipment
TRIM® CLEAN 2012 Low-foaming, Nonsilicated Cleaner for Aluminum and Multi-metal
TRIM® CLEAN 2012 is a highly-concentrated cleaner built for spray washing aluminum and other metals at ambient to slightly elevated temperatures. The mild pH of this product means it is compatible with most waste treatment (including ultrafiltration) and it does not contain boron, phenols, or silicates.
With a mild pH, CLEAN 2012 will not cause staining on aluminum or yellow metals
Formulated without silicates or other high pH additives, CLEAN 2012 is compatible with ultrafiltration systems and bio-remediation
An excellent choice where one product is used for multiple metals, as it is compatible with both ferrous and nonferrous materials (except magnesium)
Hard water tolerant, CLEAN 2012 has only moderate foam at room temperature
Contains no borates or nitrites, no SARA 313 or EPA 33/50 listed ingredients and contains no butyl cellosolve
Economical and effective for removing coolants and light oils
TRIM® CLEAN 2017 is an economical heavy-duty spray cleaner that removes heavy soils and oily residues from ferrous and magnesium parts. Often used in rebuild operations and for cleaning up cast iron, stamped or drawn steel parts, or removing heavy RP coatings.
Very economical way to remove heavy soils and light rust
Low foaming at ambient temperatures, and even lower when used above 120°F (49˚C)
Can be recycled using XYBEX® equipment
Contains no solvents, borates, silicates, nitrites, or amines
Long bath life
Excellent compatibility with magnesium
Will prevent flash rusting and provide one-to-two days of in-process corrosion inhibition if not rinsed
TRIM® CLEAN 2020 Washing Compound for Ultrasonic and Immersion Washers
TRIM® CLEAN 2020 is a concentrated, very high performance cleaner made for washing all metals including brass, copper alloy, and aluminum in ultrasonic or immersion washers. Its cleaning ability is extraordinary, which often leads to shorter cleaning cycles or elimination of cleaning steps. CLEAN 2020’s oil rejecting properties mean longer bath life and economical operation.
Excellent cleaning in immersion and ultrasonic tanks
Long life because oils split rapidly to the surface of your cleaner tank where they can be skimmed off
An excellent choice where one product is used for multiple purposes; such as washing mixed batches of ferrous, aluminum, and copper alloy parts
Will provide extended in-process tarnish resistance on copper and copper alloy parts
Safe on aluminum, aluminum alloy, and magnesium
Contains no borates, phenols or nitrites, no SARA 313 or EPA 33/50 listed ingredients, and contains no butyl cellusolve
Will remove coolant residues as well as straight oils
TRIM® CLEAN 2023 Washing Fluid for Aluminum and Multi-Metal Parts
TRIM® CLEAN 2023 “Big Al” is a highly concentrated liquid parts washing compound/corrosion inhibitor for use in spray washers. This product is safe and effective on aluminum alloy and steel alloy parts, as well as cast iron. CLEAN 2023 “Big Al” provides good detergency and long life for the removal of coolants, straight oils, corrosion inhibitors, and all types of metalworking fluids.
Inhibits darkening or smutting of aluminum alloys even at elevated temperatures
Excellent choice for two or three-stage spray washers and can be used for washing steel, stainless, cast iron, titanium, and aluminum alloys
Provides long bath life
Environmental approvals are simplified because CLEAN 2023 “Big Al” contains no nitrites, barium, phenols, or butyl cellosolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
Low foaming for use in high-pressure spray washers above 120F
Typically provides up to one week in-process corrosion inhibition on ferrous parts if not rinsed
TRIM® CLEAN 2029 "One Step" Parts Washing Fluid with Corrosion Inhibitor
TRIM® CLEAN 2029 “One Step” is a highly concentrated cleaner/corrosion inhibitor designed for spray washers and immersion tanks. This product will remove heavy soils and provide two-to-four weeks of indoor corrosion inhibition on steel and cast iron parts.
CLEAN 2029 “One Step” has been approved as a “Clean Air Solvent” by the California South Coast AQMD
Formulated without silicates or other high pH additives, CLEAN 2029 “One Step” is compatible with ultrafiltration systems and bioremediation
An excellent choice for cabinet-style spray washers and can be used for washing steel, stainless, cast iron, titanium, and many aluminum alloys
Hard water tolerant, it provides long bath life
Environmental approvals are simplified because CLEAN 2029 “One Step” contains no nitrites, barium, phenols, or butyl cellusolve; this formula has very low VOC content and no SARA 313 reportable ingredients
Low foaming for use in high-pressure spray washers with temperature above 125F (52C)
TRIM® CLEAN 2030 Cleaner/Corrosion Inhibitor for Ultrasonic and Immersion Washers
TRIM® CLEAN 2030 is a concentrated, very high-performance cleaner made for washing iron and steel parts and applying a short-term corrosion inhibitor in single-stage ultrasonic or immersion washers. Its cleaning ability is extraordinary which often leads to shorter cleaning cycles or elimination of cleaning steps. CLEAN 2030’s oil- rejecting properties mean longer bath life and economical operation. CLEAN 2030 can also wash most other metals including brass, copper alloy, aluminum, zinc, and magnesium.
Excellent cleaning in immersion and ultrasonic tanks
Long life because oils split rapidly to the surface of your cleaner tank where they can be skimmed off
An excellent choice where one product is used for multiple purposes, such as washing mixed batches of ferrous, aluminum, and copper alloy parts in a single-stage washer.
Will provide one-to-two weeks’ indoor rust inhibition on iron and steel, as well as in-process tarnish resistance on copper and copper alloy parts
Contains no borates, phosphates, phenols, or nitrites, and no SARA 313-listed ingredients
Will remove coolant residues as well as straight oils
•Also very compatible with magnesium and zinc
TRIM® CLEAN 2115 Low-foam Spray Washing Compound
TRIM® CLEAN 2115 is a high performance, low foam synthetic washing compound for use in very high- pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control, tramp oil rejection, and soil removal while leaving a short-term, anti-corrosive film on cast iron or steel parts and washer surfaces.
Compatible with a wide range of materials including cast iron, steels, zinc, plastics, and composites
When washing aluminum parts above 100F consider using TRIM® CLEAN 2115AL
Does not foam even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115 an excellent choice where rapid buildup of coolant carryover creates a foam problem
Many CLEAN 2115 applications are in the range of 1500 to 3000 PSI (100 to 200kPa)
Provides excellent short-term corrosion inhibition on most common ferrous alloys
Extremely low carryoff keeps operating costs down
Low foam and mist
Very low initial odor level
Can be used on most aluminum alloys if kept under 100F
Exceptional sump life and great tramp oil rejection
TRIM® CLEAN 2115AL is an aluminum compatible, high-performance, low-foam synthetic washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control and tramp oil rejection.
Compatible with a wide range of materials including aluminum, cast iron, steels, zinc, plastics, and composites
Resists foaming even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115AL an excellent choice where rapid buildup of coolant carryover creates a foam problem
Many CLEAN 2115AL applications are in the range of 3,000 to 10,000 PSI (200 to 660 kPa)
Provides short term corrosion inhibition on cast iron and ferrous alloys
Excellent biostability
Extremely low carryoff keeps operating costs down
Low foam and mist
Very low initial odor level
Exceptional sump life and great tramp oil rejection
TRIM® CLEAN 2430 Near-neutral Washing Compound
TRIM® CLEAN 2430 is a highly-concentrated, mild pH, liquid-parts washing compound/corrosion inhibitor made for aluminum alloy and steel alloy parts as well as cast iron, copper, brass, and bronze. This product does a great job in single and multi-stage spray washers providing great detergency and long life. CLEAN 2430 may be used in medium and high-pressure spray washers and provides in process corrosion inhibition when not rinsed.
CLEAN 2430 provides state-of-the-art cleaning performance in a mild pH package
Nitrite and silicate free and leaves no powdery residue
Low foaming at normal operating temperatures for use in high-pressure spray washers
CLEAN 2430 “splits” oils to the surface of the cleaner tank for easy skimming
Is very hard-water stable and an excellent choice where ferrous, aluminum, and copper alloy parts are being washed in a single washer system
Has a mild pH and provides a week or more of indoor anti-corrosion for ferrous metals if not rinsed
Provides long life between washer cleanouts
TRIM® CLEAN 3011 Residue-free Multi-Metal Cleaner
TRIM® CLEAN 3011 is a concentrated multi-purpose fluid that excels as a liquid parts washing compound or corrosion inhibitor and does not foam even at room temperature in high-pressure spray washers. It will remove light oils and water soluble cutting and grinding fluid residues and leave behind a thin rust inhibiting film for in-process corrosion inhibition of ferrous parts. CLEAN 3011 is also safe for use on aluminum alloy, copper, brass, bronze, and zinc. CLEAN 3011 is an excellent choice in cast iron operations where it can be used for cleaning and rust inhibition with excellent biostability.
Silicate, phosphate, and boron free and leaves no powdery residue
Low foaming for use in high-pressure spray washers or grinders and has excellent hard water stability
Has a moderate pH, excellent anti-corrosion, and does not require rinsing, making it an excellent short term, in-process corrosion inhibitor
This product maintains its alkalinity and biostability for long periods of time and will tolerate stagnant conditions such as leak test baths. It is also used in hydrostatic leak testing applications
TRIM® CLEAN AMO™ Natural-solvent Cleaner and Degreaser
TRIM® CLEAN AMO™ "A maize `N Orange"™ is a natural-solvent cleaner that can be mixed with water and used for a wide range of industrial cleaning jobs. CLEAN AMO does an outstanding job removing oily, greasy, or resinous soils at room temperature.
CLEAN AMO cleans with natural solvents extracted from corn (maize) and oranges (d-limonene), along with several additional ingredients that improve performance and water mixability
With a neutral pH and low conductivity, AMO will not cause splitting of TRIM® coolants
Formulated without silicates, high pH additives, or biocides, CLEAN AMO is compatible with ultrafiltration systems and bioremediation
Unlike most water-mixable degreasers, CLEAN AMO does not require heating to remove greases and resins
AMO can be used straight (100%) or cut back with water depending on the application
There are no mineral oils or petroleum solvents in CLEAN AMO
AMO can be used for general cleaning tasks and to remove soils from parts, tools, and machines
Users like CLEAN AMO’s pleasant orange scent
Environmental approvals are simplified because CLEAN AMO contains no nitrites, barium, phenols, or butyl cellusolve and has no SARA 313 reportable ingredients
An effective “mop bucket” cleaner. Also for use in floor scrubber machines
CLEAN AMO rinses off easily with plain water
TRIM® CLEAN B1 Booster for High-performance Spray Cleaning
TRIM® CLEAN B1 is a highly concentrated blend of surfactants (surface-active agents) designed to add cleaning power to high-pressure spray washers without causing excessive foaming. The product may be added to a wide range of TRIM® alkaline cleaners to boost cleaning power.
CLEAN B1 contains no borates, phosphates, nitrites, or amines
CLEAN B1 is low foaming when used above 115°F
This product is an excellent choice where both ferrous and/or copper alloy parts are being processed
CLEAN B1 will not stain aluminum parts
CLEAN B1 is odorless
Highly caustic cleaners often produce “soaps” as a part of their cleaning action; CLEAN B1 is very effective at reducing foam resulting from the formation of these soaps
Cleaner bath life can often be extended by using small doses of CLEAN B1; this product is particularly effective in removing oily soils, but will not affect the “split” of oils in TRIM® CLEAN 2430.
TRIM® CLEAN DF1 Antifoam for TRIM® Cleaners
TRIM® CLEAN DF1 is a paintable, non-dimethyl polysiloxane antifoaming agent designed to eliminate excessive foaming in TRIM® products. This product does not require premixing.
Does not require premixing
Compatible with all TRIM® cleaners and most water-based metalworking fluids
Odorless and does not cause staining
Contains no phenols, borates, phosphates, nitrites, or amines
TRIM® Non-butyl Floor and Multi-purpose Cleaner
TRIM® CLEAN F2™ is a super concentrate that does an outstanding job in floor cleaning and other multi-purpose uses. In addition to its primary job in automatic floor scrubbers, it is often used for general-purpose cleaning, mop bucket cleaning, and parts washing in room temperature wash tanks. The mild pH of this product means it is compatible with most waste treatment (including ultrafiltration) and it will not degrade TRIM® metalworking fluids with which it may come into incidental contact.
CLEAN F2 has been approved as a “Clean Air Solvent” by the California South Coast AQMD
With a mild pH and low conductivity, CLEAN F2 will not cause splitting of TRIM® coolants
Formulated without silicates or other high pH additives, CLEAN F2 is compatible with ultrafiltration systems and bioremediation
CLEAN F2 has been proven nonirritating to skin at 20% concentration
An excellent choice for packaging in spray bottles up to 20%
Can be used for general cleaning tasks and to remove soils from parts and tools
Operators like CLEAN F2’s mild, pleasant citrus scent
Environmental approvals are simplified because CLEAN F2 contains no nitrites, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
An effective “mop bucket” cleaner in addition to use in floor scrubber machines
Will remove heavy soils from floors without lifting off floor paints, coatings, or leaving a slippery residue; suitable for concrete, painted, tile, or linoleum floors
TRIM® CLEAN IP 2019s Silicated Low-foam Cleaner
TRIM® CLEAN IP 2019s is a very low foaming, liquid, cleaning concentrate designed to remove straight oils and coolants from steel, cast iron, and most aluminum parts.
An excellent cleaner and very economical to use
Compatible with aluminum, magnesium, cast iron, and steel alloys
Rejects oil for easy skimming or centrifuging to extend bath life
Nonfoaming at high pressure in a spray washer and vibratory deburring machines even at room temperature
Provides flash corrosion inhibition and up to two weeks of short term, dry, in-process corrosion inhibition
TRIM® E190 Chlorine-free Emulsion
TRIM® E190 is a chemical emulsion (soluble oil) cutting and grinding fluid that is an all-around proven performer in machining most ferrous and nonferrous materials, including aluminum, zinc, die cast, and most aerospace alloys.
Environmentally and machine friendly - contains no chlorine or sulfur EP additives, phenols, nitrites, or triazine compounds
Extremely tight emulsion for superior wetting and low carryoff
Provides superior results in a wide range of operations from general grinding to production hobbing
Superior lubricity for high torque, low SFPM jobs like drilling and tapping in soft, gummy materials
Easily removed from parts for easy cleanup before painting and plating operations
Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
Will meet most nuclear and aerospace requirements as well as Mil Std 767
TRIM® E206 Long-life Emulsion
TRIM® E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on ferrous and nonferrous materials. It has the lubricity and “guts” necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary to do high-speed turning and grinding operations.
A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, production, surface and centerless grinding, and replacing straight oil on some types of screw machines
Contains highly effective extreme-pressure additives to control built-up edge
Compatible with all ferrous and nonferrous materials
Extremely stable and fine emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
Rejects tramp oil to help extend sump life and increase recycling options
Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
Coolant residue is easily removed with water, working solution, or aqueous cleaners
Easy recycling or disposal with conventional techniques and equipment
TRIM® E206 nd Long-life Emulsion — No Dye
TRIM® E206 nd is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on ferrous and nonferrous materials. It has the lubricity and “guts” necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary to do high-speed turning and grinding operations.
A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, production, surface and centerless grinding, and replacing straight oil on some types of screw machines
Contains highly effective extreme-pressure additives to control built-up edge
Compatible with all ferrous and nonferrous materials
Extremely stable and fine emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
Rejects tramp oil to help extend sump life and increase recycling options
Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
Coolant residue is easily removed with water, working solution, or aqueous cleaners
Easy recycling or disposal with conventional techniques and equipment
TRIM® E850 Premium Emulsion
TRIM® E850 is a proprietary blend of new “green” vegetable-based technology and premium traditional lubricity additives to yield a very high-performance, easy-to-maintain metal removal fluid. This premium emulsion is operator friendly because of its mild contact nature and low chemical initial-charge odor. E850 is robust enough to deliver extended useful life and avoid rancid odors normally associated with traditional emulsions. The unparalleled physical lubricity delivers exceptional surface finish on difficult-to-machine aluminum alloys, exotics, stainless, and high-tensile strength steels.
Delivers unparalleled lubricity
Very long sump life and low carryoff rates result in low operating cost
Low product odor
Mild operator contact properties
Provides superior results in a wide range of operations
Excellent corrosion resistance on both nonferrous and ferrous materials
Superior wetting and penetration to the point of cut
Soft fluid film protects ways, chucks, and tool holders
Product contains no chlorine, boron, phenol, nitride, copper, or triazine
Easily removed from parts for easy cleanup before assembly, painting, or plating operations
High performance without the use of chlorinated paraffins
TRIM® E906 Premium, Low-foaming Emulsion
TRIM® E906 is a premium low foaming formula combining the newest available technology into our proven emulsion-based cutting platform. E906 delivers consistent machining and grinding performance on a wide range of materials and applications. The stable and predictable performance of E906 makes it a first choice for manufacturers doing work for industries as diverse as aerospace, automotive, energy, and specialty job shops. E906 offers a unique blend of both mechanical and extreme pressure lubricity agents.
Longer operational life than competitive fluids
Highly effective, extreme pressure additives control built-up edge
E906 is effective in a wide range of operations from production surface and centerless grinding to heavy-duty broaching, gear hobbing, surface, pocket, and thread milling
Low odor for pleasant operating environment
Tight emulsion reduces carryoff and gets the fluid to the point of cut
In high-speed turning and milling, E906 has the right balance of cooling and lubrication to provide great tool life and surface finishes
Low foam and low mist make it a first choice for high-pressure, high-volume coolant systems
Protects the machine tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
Coolant is easily removed with water, working solution, or TRIM® CLEAN aqueous cleaners
Easy recycling or disposal with conventional techniques and equipment
Does not contain or test positive for phenol
Will run effectively for long periods without the need for costly additives
TRIM® E917 Low-foam, High Lubricity Emulsion
TRIM® E917 is a low foam, high lubricity soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The very high levels of both chemical and mechanical lubricity in this product handle the toughest machining and grinding jobs. The stable and predictable performance of E917 makes it a first choice for high-quality, consistent parts manufacturing.
Very stable formula provides long operational life with consistent performance
Highly effective extreme pressure additives control built-up edge
E917 is effective in a wide range of operations from production surface and centerless grinding to heavy-duty broaching, gear hobbing, surface, pocket, and thread milling
Tight emulsion reduces carryoff and gets the fluid to the point of cut
In high-speed turning and milling, E917 has the right balance of cooling and lubrication to provide great tool life and surface finishes
Low foam and low mist make it a first choice for high-pressure, high-volume coolant systems
Protects the machine tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
Coolant is easily removed with water, working solution, or TRIM® CLEAN aqueous cleaners
Easy recycling or disposal with conventional techniques and equipment
Does not contain or test positive for phenol
Will run effectively for long periods without the need for costly additives
TRIM® EP High-lubricity Semisynthetic
TRIM® EP is a low oil, high performance semichemical or semisynthetic product. While EP contains limited amounts of petroleum oil, it is a fully loaded semi using synthetic fats for wetting and lubricity, chlorine, and sulfur EP additives for BUE control. While EP is most often used in heavy-duty production band sawing and drilling operations, it has found extensive use in the production grinding of hardened steel and stainless steel parts.
Has the mechanical lubricity necessary to provide protection to blade handling systems on high performance band sawing machines as well as the cooling and antiweld additives to optimize blade life
A proven mixture of EP additives and wetting agents to optimize high pressure operations including drilling and cylindrical form grinding on a variety of metals
Delivers superior tool life in spade and injector drilling operations
Has sufficient mechanical lubricity and wetting to protect the guides and rests in high volume centerless grinding
Offers particularly good performance when used in support of BZN grinding wheels in production grinding operations
Will keep machines very clean while leaving a fluid oily residue for ease of cleaning and reduced machine maintenance costs
TRIM® GRIND WC Carbide Grinding Synthetic
TRIM® GRIND WC minimizes cobalt leaching in the grinding of tungsten carbide (WC) and other high cobalt materials. Minimal cobalt leaching means increased piece part integrity, while improving “G RATIOS” and reducing grinding forces. GRIND WC is specifically designed for the carbide grinding industry; it will also perform very well in grinding ceramics, cermets, and tool steels.
Keeps super-abrasive wheels clean while not attacking super-abrasive wheel bonding systems
Carries grinding swarf to the filter, but will release swarf in properly designed settling tanks
Is not stripped out by conventional filtration systems
Operators like GRIND WC’s clear working solution for superior visibility while grinding
Exceptional sump life and good tramp oil rejection for easy skimming
Resists oxidation and varnishing
Resists cobalt leaching for improved operator safety, stronger parts, and cleaner machines
Very low carryoff equals low fluid makeup costs
Easy recycling or disposal with conventional techniques and equipment
TRIM® HD Heavy-duty Synthetic
TRIM® HD is a synthetic (chemical surface active) coolant concentrate used for general machining and grinding of ferrous materials. It utilizes a heavy-duty, chlorinated EP additive package for improved performance on stainless steel, super alloy, and most soft aluminum.
Provides rapid and effective cooling and reduces machining forces through the use of EP additives and boundary lubricants
Has superior anti-weld action to control built-up edge and chip welding
Compatible with all ferrous and most nonferrous materials
Broad range of applications by using different concentrations for different applications
Fully compatible with most nonmetallic materials
A superior product for low-speed, high-pressure operations such as production band sawing and drilling
Will keep your machines clean while leaving a soft, fluid film that protects the bare metal parts of your machine tools
TRIM® MicroSol® 185 is a high lubricity, semisynthetic, microemulsion coolant concentrate. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.
Compatible with a very wide range of material including cast iron, steels, copper, aluminum alloys, and many plastics and composites
Provides superior corrosion inhibition on cast iron and eliminates “hot chip” and clinkering problems
Contains no nitrites, phenols, chlorinated additives, or sulfur additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Has exceptional sump life
Requires no special disposal or recycling techniques
TRIM® MicroSol® 485 is a long life semisynthetic, microemulsion coolant designed for ferrous metalworking operations and optimized for difficult working environments associated with cast iron. MicroSol 485 prevents leaching of elemental iron and thus eliminates clinkering and oxidation of ferrous micro fines. Formula delivers extended sump life versus previous generation semisynthetics. It provides excellent cooling along with the machine friendly characteristics you expect from TRIM® coolants. MicroSol 485 is value-priced and specifically designed for use on ferrous metals.
The most cost conscience MicroSol® offering
Dramatically extends useful life without the need for tank-side biocides or fungicidest
Provides superior corrosion inhibition on cast iron and eliminates “hot chip” and clinkering problemst
Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additivest
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenancet
Requires no special disposal or recycling techniques
TRIM® MicroSol® 585 is a high lubricity, semisynthetic, microemulsion coolant. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM® coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol® 585 has proven to be an exceptional machining fluid for titanium alloys.
Compatible with a very wide range of material including cast iron, steels, copper, titanium and aluminum alloys, and many plastics and composites
Optimized combination of cooling and lubricity for titanium machining applications
Provides superior corrosion inhibition on cast iron and eliminates “hot chip” and clinkering problems
Excellent alternative to chlorinated soluble oils on high silica aluminum alloys
Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Has exceptional sump life without the use of biocides or fungicides
Requires no special disposal or recycling techniques
TRIM® MicroSol® 585XT is a high-lubricity, semisynthetic, microemulsion coolant. Formula delivers extended sump life versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM® coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.
Dramatically extends useful life without the need for tank-side biocides or fungicides
Compatible with a very wide range of material including cast iron, steels, copper, titanium and aluminum alloys, and many plastics and composites
Optimized combination of cooling and lubricity for titanium machining applications
Provides superior corrosion inhibition on cast iron and eliminates “hot chip” and clinkering problems
Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Requires no special disposal or recycling techniques
TRIM® MicroSol® 606 Long-life Microemulsion
TRIM®MicroSol®606 is a microemulsion semisynthetic coolant made specifically for machining aluminum, steel and alloy steel. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM® coolant.
MicroSol 606 is a very versatile product that does an outstanding job in milling, drilling and tapping cast or wrought aluminum, vertical or horizontal machining center work on alloy steel, surface and centerless grinding, and in general purpose job shop operations
MicroSol 606 contains very effective extreme-pressure additives to control built-up edge
It is compatible with all ferrous and nonferrous materials
This product has a very fine emulsion, which helps to get the fluid to the point of cut
MicroSol 606 rejects tramp oil to help extend sump life and increase recycling options
A soft fluid film prevents sticky ways, chucks, tool holders, and fixtures
Coolant residue is easily removed with water, working solution, or TRIM® CLEAN aqueous cleaners
Easily recycled or disposed of with conventional techniques and equipment
MicroSol 606 is a very stable product with long sump life and minimal carryoff
TRIM® MicroSol® 606 bd Long-life Microemulsion - Blue Dye
Same as MicroSol® 606 with added blue dye.
TRIM® MicroSol® 606 bd is a microemulsion semisynthetic coolant made specifically for machining aluminum, steel and alloy steel. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM® coolant.
MicroSol 606 is a very versatile product that does an outstanding job in milling, drilling and tapping cast or wrought aluminum, vertical or horizontal machining center work on alloy steel, surface and centerless grinding, and in general purpose job shop operations
MicroSol 606 contains very effective extreme-pressure additives to control built-up edge
It is compatible with all ferrous and nonferrous materials
This product has a very fine emulsion, which helps to get the fluid to the point of cut
MicroSol 606 rejects tramp oil to help extend sump life and increase recycling options
A soft fluid film prevents sticky ways, chucks, tool holders, and fixtures
Coolant residue is easily removed with water, working solution, or TRIM® CLEAN aqueous cleaners
Easily recycled or disposed of with conventional techniques and equipment
MicroSol 606 is a very stable product with long sump life and minimal carryoff
TRIM® MicroSol® 685 is a high-lubricity, semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM® coolant.
Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
Reduces oil mist and residues often associated with high-lubricity alternatives
Contains no nitrites, triazines, phenols, or sulfurized EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Forms stable microemulsion in hard water environments
Compatible with a very wide range of material including aluminum, magnesium and copper alloys, cast iron, steels, stainless steels, and many plastics and composites
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Has exceptional sump life without the use of tank side additives
Requires no special disposal or recycling techniques
TRIM® MicroSol® 695 is a premium high-lubricity, semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM® coolant.
Excellent alternative to chlorinated soluble oils and semisynthetics on high-silica aluminum alloys
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Reduces oil mist and residues often associated with high lubricity alternatives
Delivers cost-effective performance as required in the automotive industry, yet meets the demanding standards of aerospace manufacturers
Contains no chlorinated compounds, nitrites, triazines, phenols, or sulfurized EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Forms stable microemulsion in hard water environments
Compatible with a very wide range of material including aluminum, magnesium and copper alloys, cast iron, and many plastics and composites
Provides exceptional sump life
Requires no special disposal or recycling techniques
TRIM® MIST Synthetic Misting Fluid
TRIM® MIST is a surface active synthetic coolant concentrate for spray mist operations. It is a clear and virtually odorless fluid that controls the overspray that is common with standard cutting and grinding fluids. It works well in cutter/grinder operations or where spray mists are used on boring mills and high-speed face milling.
Provides rapid and effective cooling
Keeps grinding wheels clean and free of loading
Has superior anti-weld action to control built-up edge and chip welding
Compatible with all ferrous and most nonferrous materials
Compatible with most nonmetallic materials
Has very low odor and is pleasant to work with
Contains no oil to leave slippery films on the work piece, the machine, or in the surrounding area
Has a very low initial odor level which usually disappears after using for one to two days
Will keep your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools
Has exceptional sump life and very good tramp oil rejection
TRIM® Minimum Quantity Lubrication Fluid
TRIM® MQL™ 1000 is a high-performance, vegetable-ester-based, micro-lubrication fluid. It is fully compatible with all “micro lube” and micro-mist systems. MQL 1000 contains a blend of environmental and operator-friendly materials that provide very high levels of EP and boundary lubrication to control BUE and sliding friction.
MQL 1000 out-performs the competition in sawing, drilling, tapping, reaming, and milling, to name just a few. In situations where it is impractical to use a micro-lubrication applicator, MQL 1000 may be manually applied to the tool or the work piece.
No chlorine, sulfur, or mineral oil
Out-performs the more expensive products
Environmentally friendly, renewable resource based
Easily water washable – does not produce hard-to-remove residues
Very low mist
Promotes superior finish and tool life and is compatible with all materials
Very high levels of lubricity with even minimum quantities of material at the point of cut for high material removal rates
Has been extensively tested and proven in all major brands of micro lube applicators
TRIM® NOCOR® E6 is a super-concentrated, barium-free, water-based emulsion rust inhibitor that will protect steel, cast iron, and other ferrous parts from in-plant corrosion for up to six months. Parts coated with NOCOR E6 have a soft, almost invisible film that is easily removed using mild cleaners.
Environmental approvals are simplified because NOCOR E6 is nitrite, barium, boron, phenol, and phosphate free
NOCOR E6 is low foaming, for use in low-pressure spray washers and flow coating operations. Dip application is also a good way to apply this product
An excellent choice where both ferrous and/or copper alloy parts are being processed
NOCOR E6 has a moderate pH, is practically odorless, and it’s nonflammable for improved safety
Working concentration ranges from 4% to 16% which translates into much lower cost than traditional straight oil/solvent products
TRIM® NOCOR® S2 Water-soluble Corrosion Inhibitor
TRIM® NOCOR® S2 is a synthetic, water soluble, ferrous corrosion inhibitor for short-term storage or shipment. Effective at concentrations from 3%–10% in water, it provides a very thin, water soluble protective film.
The transparent film left by NOCOR S2 is easily removed and will not interfere with additional machining, gauging, or assembly steps
Barium-free and contains very low levels of volatile organic compounds as applied
TRIM® OCA Clear Anti-weld Extreme Pressure Oil Additive
TRIM® OCA is a clear oil additive containing chlorinated paraffins. TRIM OCA has outstanding anti-welding and extreme pressure properties at moderate to heavy speeds and loads. Some significant uses of OCA include:
Good lubricity properties in addition to anti-weld
Used with great success to extend the life of taps and form tools in screw machining operations
Particularly effective on ferrous metals and aluminum
Compatible with all TRIM straight oils, TRIM TAP LIGHT, and TRIM TAP HEAVY
For additions to straight cutting oils in screw machine operations, a starting rate of 5% is recommended
For very heavy-duty tasks, such as threading hard stainless or alloy steels, try starting at up to 15%
An effective booster additive for recycling straight cutting oil at an add rate of 1%-3%
There is no maximum rate; TRIM OCA can be used neat for tasks such as high-speed tapping
TRIM® OD 250 Straight Oil
TRIM® OD 250 is a low-odor, light-colored oil designed for operations where low viscosity and high lubricity are required. In addition to general machining, OD 250 is particularly effective in deep-hole drilling and creepfeed grinding where its ability to flow into the cutting zone and “wet” the surfaces increases tool life and reduces heat. OD 250 is also an excellent choice for carbide, quartz, and ceramic grinding operations.
Well-balanced, extreme-pressure additive package for a wide variety of applications
Light color
Low odor
Viscosity and lubricity balanced for creepfeed grinding, deep-hole drilling, and fine surface grinding
TRIM® OH200 Superfinish and Honing Oil
TRIM® OH200 is a medium-duty honing and super finishing straight oil for alloy steels. OH200 can also be used for tapping and reaming of cast iron and aluminum alloys.
Good lubricity
Will not stain copper alloys
High flash point
Contains no kerosene
Copper Corrosion Test: Inactive at 212°F, 100°C, 1 Hr.
TRIM® OM 100 Nonchlorinated Cutting Oil
TRIM® OM 100 is a straight cutting oil designed for general machining of all metals including aluminum, copper, brass, and cast iron. OM 100 provides excellent lubricity without staining nonferrous metals.
Excellent lubricity for efficient metal removal
Residues are very easily removed with TRIM® CLEAN aqueous cleaners such as TRIM® CLEAN 2029 “One Step”
Will not stain
No active sulfur or chlorine
TRIM® OM 287 Versatile Cutting Oil
TRIM® OM 287 is a straight cutting oil designed for general machining of all metals. OM 287 has a balanced, extreme-pressure package for excellent finishes and tool life on a variety of metals.
Excellent lubricity for efficient metal removal
Light color and low odor for good operator acceptance
Will not stain; runs clear
High-quality raw materials resist oxidation
Lower viscosity allows better cooling
Safe for use on nonferrous as well as ferrous metals
TRIM® OM 300 Straight Oil
TRIM® OM 300 is a high-performance straight cutting oil designed with active extreme-pressure additives to reduce the formation of built-up edge in cutting hard-to-machine materials including 300 series stainless. Moderate viscosity and high flash point makes OM 300 a very effective lubricant for difficult creepfeed grinding operations.
Controls built-up edge
Longer tool life
Better finish
Machines difficult ferrous and stainless steel alloys
TRIM® OM 303 Nonchlorinated Cutting and Lubricating Oil
TRIM® OM 303 is a highly-formulated, semisynthetic straight oil designed for use in conventional and Swiss-style screw machines, high-speed turning centers, and high-performance multi-station machines, such as Hydromats. OM 303 is safe for use on aluminum alloy and steel alloy parts, as well as cast iron, copper, brass, and bronze. This product is excellent for high-pressure applications such as thread rolling and thread-form tapping. OM 303 has proven itself in difficult operations on stainless and bearing steels. OM 303 provides lubrication properties similar to ISO 32 general-purpose lube oils.
Very light colored and clean running
Low-foaming and low-misting for use in aggressive operations
Oxidation inhibited for longer life, and an excellent choice where both ferrous and aluminum or copper alloy parts are being machined aggressively
Far easier to wash off parts than many oils of similar or even lower performance
Has replaced dark, heavy-active sulfur/chlorine straight oils in several large operations while providing superior results in tool life
An outstanding product in thread rolling, thread-form tapping, and in Swiss screw machines with solid bushings
Contains no active sulfur, therefore, does not stain parts
TRIM® OSA High-lubricity, Clear Sulfur Oil Additive
TRIM® OSA is a clear oil additive containing inactive sulfur. TRIM OSA has outstanding lubricity in all circumstances and provides extreme pressure anti-weld at high speeds and loads. Some significant uses of TRIM OSA include:
As an additive to straight grinding oils, will reduce heat, misting, and allow increased feed rates in creepfeed applications.
Has been used with great success to extend the life of thread-forming taps and thread-rolling dies.
In Swiss-type screw machines using solid carbide bushings, dramatically increases bushing life.
Compatible with all TRIM® straight oils, and TRIM® TAP LIGHT, TRIM® TAP HEAVY, and TRIM® TAP NC.
TRIM® OSFA Lubricity Additive for Straight Cutting Oils
TRIM® OSFA is an additive package used to replace or increase the level of fats and sulfur in cutting and grinding oils. Typically it is added to improve sliding friction and improve mechanical lubricity, though it may help to control BUE in some situations.
TRIM® REGULAR Synthetic
TRIM® REGULAR is a chemical surface active or synthetic coolant concentrate designed for general machining and grinding of ferrous materials. It is particularly well suited for machining cast iron, but is an exceptional grinding and high velocity turning and milling fluid. REGULAR contains no sulfur, chlorine, or phosphorus, and meets the requirements of even the most restrictive chemical specifications.
Provides rapid and effective cooling
Keeps grinding wheels clean and free of loading
Has significant levels of specialized wetting agents for boundary lubrications even at very high SFPM
Has superior anti-weld action to control built-up edge and chip welding
Compatible with ferrous and nonferrous metals as well as most nonmetallic materials
Is exceptionally clean and oil free to promote a clean, safe work environment
Will keep your machines clean while leaving a soft, fluid film that protects the bare metal parts of your machine tools
TRIM® RINSE 100 Washing Compound Concentrate
TRIM® RINSE 100 is a washing compound concentrate that does a great job of removing metalworking fluids and light oily films. This product will not stain ferrous or nonferrous materials and leaves an extremely thin film corrosion inhibitor, which does not interfere with gauging of parts. RINSE 100 is compatible with the TRIM® family of cutting and grinding fluid concentrates.
Compatible with all aluminum, magnesium, copper alloys, steel and cast iron
An effective machine cleaner and also a great product for general cleaning of loose tools and parts
An excellent product for use in ultrasonic cleaner systems, as well as immersion washers
Provides up to one week or more of in-process corrosion inhibition on ferrous parts
TRIM® RPO 12 Long-term Corrosion Inhibitor
TRIM® RPO 12 is a long-term, indoor rust preventative with a soft waxy film. RPO 12 is compatible with all metals and can be applied by dip, spray, or brush-on methods. The film thickness will be approximately 8 microns.
Nonstaining
Humidity Cabinet Test: No rust @ 1400 hours (ASTM D1748)
Salt Spray Test: No rust @ 168 hr. (ASTM B117)
TRIM® RPO 2L Corrosion-inhibiting Oil
TRIM® RPO 2L is a nonstaining, water-displacing lubricant and rust preventative. RPO 2L is designed to provide moderate lubrication and indoor rust protection. It is easily removed with alkaline cleaners. RPO 2L meets the requirements of Mil Spec VVL 500.
Excellent lubricity
Rust protection film remains fluid
High flash point
Easily removed with detergent cleaner
Nonstaining
Oxidation resistant
Humidity Cabinet Test: 350 hours – no rust (ASTM D1748)
Salt Spray Test: very slight @ 4 hours (ASTM B117)
TRIM® RPO 6 Rust Preventative Oil
TRIM® RPO 6 is a nonstaining, water displacing, thin-film rust preventative which can be used on a variety of metals. RPO 6 is designed to provide indoor rust inhibition. RPO 6 provides excellent protection for bearings and other precision parts, in-process parts in storage, as well as parts in transit.
Excellent rust inhibition, generally in excess of six months in dry storage
Nonstaining, and RPO 6 will provide cleaning action as well
Water displacing to help prevent rust due to water trapped under the protective film
Oxidation resistant to resist varnishing over long storage periods
Easily removed with detergent cleaners such as TRIM® CLEAN 2029 “One-Step”
Humidity Cabinet Test: No rust at 1000 hours (ASTM D1748)
Salt Spray Test: 8 hours no rust/24 hours very slight (ASTM B117)
TRIM® RPO 6BF is a barium-free, nonstaining, water displacing, thin-film corrosion inhibitor or rust preventative which can be used on a variety of metals. RPO 6BF is designed to provide indoor corrosion inhibition. RPO 6BF provides excellent protection for bearings and other precision parts, in-process parts in storage, as well as parts in transit.
Barium free
Light film for limited carryoff
Excellent corrosion inhibition, generally in excess of six months in dry storage
Nonstaining and RPO 6BF will provide cleaning action as well
Water displacing to help prevent rust due to water trapped under the protective film
Oxidation resistant to resist varnishing over long storage periods
V.O.C. 4.09 lbs./gal
Easily removed with detergent cleaners, such as TRIM® CLEAN 2029 “One Step”
Humidity Cabinet Test: No rust at 650 hours (ASTM D1748)
TRIM® RPO 8F Rust Preventative Oil
TRIM® RPO 8F is a barium-free, nonstaining, water displacing, thin film rust preventative which can be used on a variety of metals. RPO 8F is designed to provide indoor rust inhibition. RPO 8F provides excellent protection for bearings and other precision parts, in-process parts in storage, as well as parts in transit.
Barium-free
Light film for limited carryoff
Excellent rust inhibition, generally in excess of eight months in dry storage
Nonstaining and RPO 8F will provide cleaning action as well
Water displacing to help prevent rust due to water trapped under the protective film
Oxidation resistant to resist varnishing over long storage periods
VOC 5.25 lbs./gal
Easily removed with detergent cleaners, such as TRIM® CLEAN 2029 “One-Step”
Humidity Cabinet Test: No rust at 1000 hours (ASTM D1748)
Salt Spray Test: eight hours no rust/24 hours very slight (ASTM B117)
TRIM® SC125 Low-oil Semisynthetic
TRIM® SC125 is a low-oil, semisynthetic coolant concentrate. It is effective in general-duty machining and grinding of most materials. It is an exceptionally clean fluid and provides superior cooling, lubricity, and corrosion inhibition for grinding cast iron and mild steels. This product does particularly well in machining cast iron and in centerless or cylindrical grinding applications.
Compatible with a very wide range of materials including ferrous, nonferrous, and nonmetallic material
Will run for long periods of time without adds while providing superior sump life and corrosion inhibition
Prevents chip “clinkering” and “hot” chip hoppers when machining cast iron
Contains no chlorine, sulfur, or phosphorus based EP (extreme pressure) additives
Contains no nitrites, phenols, or formaldehyde-releasing compounds
Has very low carryoff for low, long-term operating costs
Easily recycled to reduce coolant purchase and disposal costs
TRIM® SC200 General-purpose Semisynthetic
TRIM® SC200 is a semisynthetic, general-purpose, cutting and grinding fluid concentrate for the multi-material, multi-operations shop. SC200 uses a proven EP additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics necessary for superior machining results on high-speed milling and turning operations. It also controls chip welding on soft, gummy materials like aluminum.
Good sump life in “stand-alone” machines
Effective in most grinding, sawing, drilling, and CNC turning and milling operations by varying concentrations
Provides sufficient lubricity to do down-the-hole operations in aluminum, cast iron, and most steels, including many stainless steels
Compatible with a very wide range of materials including cast iron, steels, copper, and aluminum alloys as well as most plastics and composites
Low odor and mist
Low-to-moderate foam with normal “flood” coolant application
Rejects tramp oils rapidly for easy recycling with good sump life
Easily recycled or disposed of using conventional techniques and equipment
TRIM® SC210 Nonchlorinated Semisynthetic
TRIM® SC210 is a semisynthetic, general-purpose cutting and grinding fluid concentrate for the multi-material, multi-operations shop. SC210 has the wetting and cooling characteristics of a premium heavy-duty synthetic for superior turning, milling, and “plain” grinding results. It also has sufficient oil for most “down-the-hole operations” on machining centers. This product complies with most stringent health, safety, and environmental mandates.
Good performance characteristics on both steel and cast iron
Sufficient lubricity for drilling, tapping, and reaming in most common ferrous and nonferrous materials
Compatible with a very wide range of materials including cast iron, steels, copper, and aluminum alloys as well as plastics and composites
Low odor and mist
Low-to-moderate foam with normal “flood” coolant application
Effective in most grinding, sawing, drilling, and CNC turning and milling operations
Provides good corrosion inhibition on all ferrous and nonferrous metals
Easily recycled or disposed of using conventional techniques and equipment
No chlorine or sulfur “EP” additives
TRIM® SC230 Oil-rejecting Semisynthetic
TRIM® SC230 is a low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.
Compatible with a very wide range of materials including cast iron, steels, and copper alloys as well as plastics and composites
Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
Will not foam, even at very high pressures and flow rates
Is a water clear fluid to allow easy viewing
Has good flushing action so that chips and fines are readily flushed into the machine’s chip removal system
Very low carryoff to reduce the need for makeup coolant for low, long term operating
costs
Easily recycled to reduce coolant purchase and disposal costs
TRIM® SC230 nd Oil-rejecting Semisynthetic - No Dye
Same as TRIM® SC230 but without dye.
TRIM® SC230CG Oil-rejecting Semisynthetic
TRIM® SC230CG is a low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230CG makes use of the latest in synthetic coolant formulations and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.
Compatible with a very wide range of materials including cast iron, steels and copper alloys as well as plastics and composites
Has the lubricity to do form grinding, drilling, tapping and reaming operations without the use of chlorine or sulfur-based EP additives
Will not foam even at very high pressures and flow rates
Is a water clear fluid to allow easy viewing of parts during grinding and machining
Has good flushing action so that chips and fines are readily flushed into the machine’s chip removal system
Very low carryoff to reduce the need for makeup coolant for low, long-term operating costs
Easily recycled to reduce coolant purchase and disposal costs
TRIM® SC230CG nd Oil-rejecting Semisynthetic - No Dye
TRIM® SC230CG nd is a low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230CG nd makes use of the latest in synthetic coolant formulations and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.
Compatible with a very wide range of materials including cast iron, steels and copper alloys as well as plastics and composites
Has the lubricity to do form grinding, drilling, tapping and reaming operations without the use of chlorine or sulfur-based EP additives
Will not foam even at very high pressures and flow rates
Is a water clear fluid to allow easy viewing of parts during grinding and machining
Has good flushing action so that chips and fines are readily flushed into the machine’s chip removal system
Very low carryoff to reduce the need for makeup coolant for low, long-term operating costs
Easily recycled to reduce coolant purchase and disposal costs
TRIM® SC235 Semisynthetic
TRIM® SC235 is a low oil, semisynthetic coolant that meets the needs of the most modern and demanding manufacturers. SC235 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that rejects tramp oil, has great sump life and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.
Compatible with a very wide range of materials including cast iron, steels, copper alloys, plastics, and composites
Very low foam and mist
Provides excellent corrosion inhibition on all common ferrous and nonferrous alloys
Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, tapping, and reaming operations without the need for chlorine or sulfur-based EP additives
Extremely low carryoff for very low total operation costs
Exceptional sump life and very good tramp oil rejection
Very low initial odor level which usually disappears after one-to-two days
Minimizes the buildup of sticky residues
TRIM® SC410 Chlorine-free Semisynthetic Coolant
TRIM® SC410 is a chlorine-free, semisynthetic coolant using vegetable-derived and ester lubricants. It is very clean running in moderate-duty machining and grinding of both ferrous and nonferrous materials. In addition to its broad range of machining qualities, it has been specially optimized for machining “gray iron” castings and for surface and cylindrical grinding of ferrous materials.
Based on our exclusive ester lubricant technology, contains no mineral (petroleum) oil
Low foaming in most operations
Compatible with a very wide range of materials including ferrous, nonferrous, and nonmetallic material
Will provide superior sump life and corrosion inhibition for long periods of time without adds
Prevents chip “clinkering” and “hot” chip hoppers when machining cast iron
Will keep the machine and work environment clean even when machining or grinding gray iron
Contains no chlorine or sulfur-based additives
Contains no nitrites, sulfonates, Alkylphenol Ethoxylates, or phenols and is not SARA 313 reportable
Very low carryoff and long sump life, delivering low operating costs
Hard water tolerant up to 30 grains
TRIM® SC520 General-purpose Semisynthetic
TRIM® SC520 is a low-odor, low-cost semisynthetic, general-purpose, cutting and grinding fluid concentrate for the multi-material, multi-operational shop. SC520 uses a proven EP-additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics necessary for superior machining results on high-speed milling and turning operations. It also controls chip welding on soft, gummy materials like aluminum.
Good sump life in “stand-alone” machines
Low odor and mist
Effective in most grinding, sawing, drilling, and CNC turning and milling operations by varying concentrations
Provides sufficient lubricity to do down-the-hole operations in aluminum, cast iron, and most steels, including many stainless steels
Compatible with a very wide range of materials including cast iron, steels, copper, and aluminum alloys as well as most plastics and composites
Low-to-moderate foam with normal “flood” coolant application
Rejects tramp oils rapidly for easy recycling with good sump life
Easily recycled or disposed of using conventional techniques and equipment
TRIM® SC536 Low-oil Semisynthetic
TRIM® SC536 is a low oil, semisynthetic coolant that delivers significant performance improvements over previous generations of metalworking fluids. SC536 is a proprietary formula of specially synthesized oil and synthetic technologies blended to deliver unbeatable performance in a variety of machining and grinding operations. This innovative blend keeps machines clean and provides the longest sump life available.
Compatible with a very wide range of materials including cast iron, steels, copper alloys, plastics, and composites
Very low foam and mist
Provides excellent corrosion inhibition on all common ferrous and nonferrous alloys
Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, tapping, and reaming operations without the need for chlorine or sulfur-based EP additives
Extremely low carryoff for very low total operating costs
Exceptional sump life and very good tramp oil rejection
Very low initial odor level which usually disappears after one to two days
Minimizes the buildup of sticky residues
TRIM® SC610 High-lubricity Semisynthetic Coolant
TRIM® SC610 is a high-lubricity, semisynthetic coolant built with Master Chemical’s vegetable derived and chlorinated ester lubricants. It is very clean running with high levels of mechanical and chemical lubricity and, it contains no mineral oil. SC610 is optimized for turning and machining centers performing high velocity operations and/or low-speed, high-torque, down-the-hole operations. SC610 excels on high strength steel and super alloys and also on wrought and cast aluminums.
Based on our exclusive ester lubricant technology - contains no mineral (petroleum) oil
Low-foaming in most operations
Performs like a heavy-duty soluble oil in down-the-hole operations on machining and turning centers
Compatible with a very wide range of materials including ferrous, nonferrous, and nonmetallic material
Will provide superior sump life and corrosion inhibition for long periods of time without adds
Very clean-running for clean machines, parts, and work environment
Contains no nitrites, sulfonates, or phenols and is not SARA 313 reportable
With very low carryoff and long sump life, SC610 delivers low operating costs
TRIM® SkidRid™ is a highly concentrated cleaner built for multiple uses including floor cleaning and general degreasing. In addition to automatic floor scrubbers, it does a great job in general purpose cleaning, mop bucket cleaning, and parts washing in room temperature wash tanks. SkidRid is completely free of 2-butoxyethanol (Butyl) and is not reportable under SARA section 313.
Specially formulated to lift off stubborn tire marks - pre-application from a spray bottle followed by power floor scrubbing can often deal with the most difficult areas
Contains no 2-butoxyethanol (Butyl), an ingredient of increasing concern often found in products of this type
All of the ingredients used in SkidRid are biodegradable
Economical to use because it is very highly concentrated - a little bit goes a long way
Can be used for general cleaning tasks and to remove soils from parts and tools
Hard water tolerant, SkidRid has a mild, pleasant scent
Environmental approvals are simplified because SkidRid contains no nitrites, phosphates, barium, phenols, or butyl cellosolve; this formula has very low VOC content and is not SARA 313 reportable
Effective in immersion style washers and ultrasonic baths can be used at room temperature up to 120°F (49°C
)
An effective “mop bucket” cleaner in addition to being useful in floor scrubber machines
Removes heavy soils from floors without lifting off floor paints, coatings, or leaving a slippery residue; thereby suitable for concrete, painted tile, or linoleum floors
TRIM® High-powered, Non-butyl Floor Cleaner Super Concentrate
TRIM® Skramex™ is a super concentrated, high-powered cleaner designed for factory floor cleaning and heavy maintenance cleaning, particularly in metalworking or rebuild shops and mills. This product is highly caustic and capable of emulsifying even the most difficult floor soils such as those used in machining, drawing, stamping, foundries, and mills. Skramex is specially formulated without “butyl” to eliminate government reporting requirements.
Economical because it is super concentrated, Skramex will clean most soils at concentrations of 0.5% or less when used in a power floor scrubber
Skramex is formulated specially to remove oils, drawing compounds, carbon residue, and other heavy soils, while not harming concrete (this can be a problem with cheap floor cleaners)
Not just a floor cleaner, Skramex works in both, power floor scrubbers and mop buckets and can be used for very heavy-duty maintenance cleaning jobs; also effective and economical when used as a cold-soak cleaner for ferrous parts
Your floor scrubber or mop bucket will go further and last longer because Skramex has super high concentrations of surfactants, solvents, and alkaline builders to make it last a long time (this saves you time and reduces waste because you can spend more time cleaning and have less dirty water to dispose of)
Environmental approvals are simplified because Skramex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
TRIM® TAP HEAVY High-lubricity Tapping Fluid
TRIM® TAP HEAVY is a 100% synthetic and vegetable-based lubricant possessing strong friction-reducing properties. It is designed as a tough-operation product for use with metals of low machinability. It is recommended for use at full strength for brush-on applications required in reaming, tapping, and threading
Promotes excellent finish
Assists in parts size control
Delivers exceptionally long tool life
Contains no mineral oils
Reduces rubbing of the tool flank
Formulated to be water washable to facilitate removal of residue from machine parts
Compatible with most TRIM® cutting and grinding fluids when applied for added lubricity on extremely tough jobs
Recommended especially for use on taps ½ inch diameter and larger
TRIM® TAP LIGHT Tapping Fluid
TRIM® TAP LIGHT is a synthetic/vegetable/mineral oil blend possessing strong friction-reducing properties. It is designed for use with metals of low machinability and is specifically recommended at full strength for flooding applications involving broaching, sawing, milling, tapping, threading, gear cutting and shaving, gundrilling, and reaming.
Promotes excellent finish
Assists in parts size control
Delivers exceptionally long tool life
Reduces rubbing of the tool flank
Formulated to be water washable to facilitate removal of residue from machine parts
Compatible with most TRIM® cutting and grinding fluids when applied for added lubricity on extremely tough jobs
TRIM® TAP NC Nonchlorinated Tapping Fluid
TRIM® TAP NC is a blend of synthetic and vegetable-based lubricants and additives possessing strong friction reducing properties. It is designed for use with metals of low machinability and is specifically recommended at full strength for flooding applications involving broaching, sawing, milling, tapping, threading, gear cutting and shaving, gundrilling, and reaming.
No chlorine, sulfur, or phenols
Promotes excellent finish
Assists in parts size control
Delivers exceptionally long tool life
Reduces rubbing of the tool flank
Formulated to be water washable to facilitate removal of residue from machine parts
Compatible with most TRIM® cutting and grinding fluids when applied for added lubricity on extremely tough jobs
Recommended especially for use on taps up to one inch diameter
All-purpose Cleaner PMC 1455-11
TRIM® TASK2™ All Purpose Cleaner is an industrial strength, water-based cleaning agent that does an outstanding job in the industrial environment for cleaning a variety of shop soils from all common surfaces. TASK2 out-cleans all the green, crystal, purple, and blue butyl-based products you may have tried in the past.
Has been proven to clean shop soils off of surfaces better than the “leading national product” of this type
Contains no “Butyl”, and also has very low V.O.C. content
Environmentally friendly, biodegradable, and contains no caustic, silicates, phosphates, nitrites, phenols, or borates
Safe on all metals and most surfaces at room temperature
Has very low conductivity and pH and will not harm TRIM® metalworking fluids
TASK2 All Purpose Cleaner is nontoxic
Glass Cleaner PMC 1406-41
TRIM® TASK2™ Glass Cleaner is an industrial strength, water-based cleaning agent that does an outstanding job in the industrial environment for cleaning machine tool glass and other hard surfaces.
Has been proven to clean shop soils off of glass and plastic surfaces better than the “leading national product” of this type
Contains no “Butyl”, and also has very low V.O.C. content
Environmentally friendly, biodegradable, and contains no ammonia, caustic, silicates, phosphates, nitrites, phenols, or borates
Safe on all metals and most surfaces at room temperature
Has very low conductivity and pH and will not harm TRIM® metalworking fluids
Great on glass, ceramics, stainless steel, chrome, Formica, and much more
Residue–free formula
Strong enough to cut through tough shop soils
Grime Fighter, Super Strength Industrial Cleaner
TRIM® TASK2™ is a grime fighting, industrial strength, non-butyl, water-based cleaning agent that does an outstanding job in the industrial, commercial, or office environment. TASK2 out-cleans all the green, crystal, purple, “mean”, “complex”, and “simple” butyl-based products you may have tried in the past.
Use full strength or dilute up to 100:1
Contains no “butyl”, caustic, silicates, phosphates, nitrites, phenols, or borates and also has very low V.O.C. content
Environmentally friendly, and certified as “Readily Biodegradable” by OECD Method 301D (EPA Guideline OPPTS 835.3110)
Safe on all metals and most surfaces at room temperature, even at full strength
Has very low conductivity, and pH and will not harm TRIM metalworking fluids
TRIM® TC 143 Phenolic Stablizer
TRIM® TC 143 is a mixture of emulsifiers and an emulsion stabilizer which, when added to chemical emulsion type products, will help enhance emulsion stability.
TRIM® TC 155 Nonferrous Corrosion Inhibitor
TRIM® TC 155 is a nonferrous corrosion inhibitor for use in water soluble and straight oil systems. It is particularly effective in preventing staining and white rust on die cast alloys containing copper.
TRIM® TC 175 Chlorinated Lubricity Additive
TRIM® TC 175 is a chlorinated EP (extreme pressure) lubrication/emulsifier additive package. It may be added to water-soluble coolant systems to replace or increase the presence of the chlorine EP additives in the system.
TRIM® TC 177 Odor Mask
TRIM® TC 177 is a water-soluble “vanilla” odor mask. This product may be used to reduce some of the odors associated with water-soluble coolant systems.
TRIM® TC 184B Nonsilicone Antifoam
TRIM® TC 184B is a nonsilicone antifoam or defoamer. It is used as a tank-side add to control foam in water-miscible coolants, washing compounds, floor soaps, etc.
TRIM® TC 203 pH Adjuster/Emulsion Stabilizer
TRIM® TC 203 is a copper amine additive developed to increase emulsion stability by raising pH.
TRIM® TC 204 Blue Dye
TRIM® TC 204 is a water-soluble blue dye. The product is used tank side to replenish depleted dye in water-soluble products or to color undyed products.
TRIM® TC 211 pH Adjuster/Emulsion Stabilizer
TRIM® TC 211 is an amine based pH adjuster for use in central systems and batch recycling systems to replenish depleted alkalinity in metalworking fluid working solutions.
TRIM® TC 220 pH Adjuster
TRIM® TC 220 is a triazine compound that is very effective in maintaining pH and building reserve alkalinity in metalworking fluid working solutions. Controlling pH within the design range of the product and maintaining an appropriate level of reserve alkalinity are key elements in extending sump life, controlling both liquid and vapor phase corrosion, and controlling the particle size and emulsion stability of soluble oils.
TRIM® TC 227 Metalworking Fluid Additive
TRIM® TC 227 is a mixture of lubricity additives. It is designed to increase the hydrodynamic lubrication of water-miscible cutting and grinding fluids. It is particularly effective in increasing tool life and reducing the forces generated in drilling, tapping, and reaming operations in soft, gummy materials. TC 227 has also been effective as an add to chemical coolants used for roll-form tapping in wrought and extruded aluminum alloys.
TC 227 is intended for use in water-miscible cutting and grinding fluids.
TC 227 may not be effective in “cationic fluids”.
The typical add for this type of product is between 0.5% and 5.0% (5,000 to 50,000 PPM). However, it is best to establish the actual add rate by experimentation in your operations.
While most of the experimental work with this product has been done in machining, there are indications that it may be very effective in some form-grinding operations.
TC 227 may cause increased foam.
TC 227 will be depleted with normal coolant carry-off, so periodic additions of it with the normal coolant makeup will be necessary to ensure consistent performance.
TRIM® TC 231 Cleanliness Additive
TRIM® TC 231 will prevent or reduce the formation of carbon (graphite) smut and hard-water soaps often found when machining some cast irons with synthetic coolants. TC 231 is a unique blend of wetting agents and surfactants that help keep the machine, tools, and work piece clean for a safer, more pleasant work environment.
TRIM® TC 233 Lubricity Additive
TRIM® TC 233 is a dual-purpose additive which is used in synthetic (e.g., TRIM® C270, C275, etc.) and some semisynthetic (e.g., TRIM® SC230, SC235, etc.) coolants. It can increase lubricity for operations such as drilling or tapping. At fluid temperatures above 95ºF (35ºC), it will act as an anti-foam.
In synthetic and semisynthetic coolants, add rates of 1%-3% may be effective in reducing friction in operations such as drilling or tapping.
If fluid temperature is above 95ºF (35ºC), TC 233 will act as an anti-foam. The add rate for use as an anti-foam is 0.1%-0.5%.
Typical running time between additions of TC 233 is two to four weeks.
TRIM® TC 234 Recycling Additive
TRIM® TC 234 is a mixture of chemicals to replace the materials that may be preferentially depleted in some (cationic) synthetic and semisynthetic products. Some of these products have such low carryoff that normal make-up will not replace all of the materials which are depleted over long periods of use. When TC 234 is used as part of a comprehensive recycling or coolant management program, it will replace and/or enhance both the ferrous and nonferrous corrosion inhibition systems of coolant working solutions.
TRIM® TC 239 Paintable Antifoam/Defoamer
TRIM® TC 239 is a paintable, platable additive used to control foam in metalworking fluids and parts washing systems.
The maximum add rate is one gallon per thousand gallons of sump volume. You may find that using less than this will be effective in your system.
For best results, pre-mix TC 239 with working solution until it is water-thin. This mixture should then be added just up-stream from the foam.
Spraying pre-mixed TC 239 directly onto the foam will knock it down quickly.
Using too much TC 239 can cause increased foam and/or form a residue on the machine, parts, or tools.
Shake or stir well before adding. If you make a dilution with working solution, shake or stir that mixture also before adding.
Do not freeze or store above 115ºF.
TRIM® TC 248 pH Adjuster – PMC#9366
TRIM® TC 248 is an amine-based pH adjuster used to replenish depleted alkalinity in metalworking fluid working solutions.
TC 248 is usually added at concentrations between 0.05% - 0.25% (50 – 2,500 ppm) to help maintain pH, improve corrosion inhibition, and improve emulsion stability. A 0.1% add of TRIM TC 248 will typically increase the pH of a 7.0 pH fluid to approximately 8.0 - 8.5.
Overuse of this product may cause ammonia and/or amine blush; therefore, care should be taken not to exceed recommended add rates.
As formulated, TC 248 does not contain MEA, DEA, TEA, Cu, or Boron.
TRIM® TC 249 Recycling Additive
TRIM® TC 249 is a synthetic recycling additive especially useful in TRIM® SC410, TRIM® SC610, or CoolPAK™ ALW systems with high-particulate loads.
Add rates start at 20 ounces per 1000 gallons and go up to 50 ounces per 1000 gallons.
TRIM® VHP® E200PW Very High-pressure, Pratt & Whitney Approved Emulsion
TRIM® VHP® E200PW is a chemical emulsion (soluble oil) coolant that specializes in heavy-duty machining and creepfeed grinding of aircraft alloys. Pratt & Whitney has approved this product for use on all materials. This approval applies to both Pratt & Whitney facilities and authorized subcontractors. The Pratt & Whitney approval number is PMC 9390.
Pratt & Whitney approval for use in all grinding and machining operations on all metals (PMC 9390)
Contains a proven and highly effective, nonchlorinated extreme-pressure additive to control built-up edge and wheel loading
No foam at very high pressures and volumes
Very high levels of boundary lubrication for superior tapping, reaming, and form grinding results
Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
Easy recycling or disposal with conventional techniques and equipment
TRIM® VHP® E210 Very High-pressure, Chlorine-free Emulsion
TRIM® VHP® E210 is a specialized heavy duty chemical emulsion soluble oil coolant concentrate. This product is a proven performer in heavy duty machining, grinding and some stamping operations. It will even run in very high-pressure situations with little-to-no foam.
Is compatible with a very wide range of material including steels, stainless steels, and aluminum alloys
Low-to-no foam even in very high-pressure operations such as creep-feed grinding, Ejector® drilling, and gundrilling or gunreaming
Has sufficient boundary lubrication to do roll-form threading in many materials
Has very good anti-weld properties without the use of either chlorinated or sulfurized EP additives
Will keep machines very clean while leaving a soft, fluid film for ease of cleaning and reduced machine maintenance costs
Requires no special disposal or recycling techniques
TRIM® VHP® E320 Very High-pressure, High-lubricity Emulsion
TRIM® VHP® E320 is a specialized heavy-duty chemical emulsion (or soluble oil) coolant concentrate. This product is a proven performer in heavy-duty machining, grinding, and some stamping operations. It is particularly effective in creepfeed grinding of steel and super alloys with either conventional or CBN wheels. It will run in very high-pressure situations with little-to-no foam.
Compatible with a very wide range of materials, but is particularly effective on high-strength steel and super alloys
Low-to-no foam even in very high-pressure operations like creepfeed grinding, Ejector® drilling, and gundrilling or gunreaming
Superior cleaning and EP lubrication characteristics to assist in fast deep cuts with plated CBN wheels in high-production steel grinding and slotting operations
Very good anti-weld properties without the use of chlorinated EP additives
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced machine maintenance costs
Requires no special disposal or recycling techniques
TRIM® VHP® E812 Very High-pressure Chlorine-free Emulsion
TRIM® VHP® E812 is a low to no foam, chlorine free, soluble oil. It is ideally suited for those operations that utilize high-pressure, high-volume coolant. VHP® E812 is a fluid that will allow you to get maximum benefits from high velocity through-the-tool coolant delivery systems on VMCs and HMCs and will assist in achieving the maximum productivity from creepfeed grinders as well. While VHP® E812 is very stable and is both operator and environmentally “friendly”, its greatest strength comes from its ability to help you get the job done. It is compatible will all metals and many nonmetallic materials as well. Even with a product as “gutsy” as VHP® E812 it will run for extended periods of time without adds and will do so in a very clean manner.
A very versatile product that works well in a wide range of operations such as production, creepfeed grinding and milling, turning, drilling, and tapping
Proven performer in difficult creepfeed grinding operations
Extremely fine soluble oil emulsion reduces carryoff for low total operating cost
Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
Very low foam, without the use of conventional defoamers
Easily recycled or disposed of without special handling or equipment
Contains no DEA, chlorine, nitrites, triazine, or phenolic compounds
TRIM® VX Extreme Lubricity Emulsion
TRIM® VX is a soluble oil (chemical emulsion) coolant designed to do the heaviest duty machining operations. VX is often used as a replacement for straight cutting and grinding oils. It contains very high levels of EP additives including stable chlorine and sulfur. Additional friction modifiers, including sulfurized fats and particle size modification technology, are used to reduce the mechanical friction seen in many heavy-duty machining and grinding operations.
Even with all these EP additives and friction modifiers, VX will not stain “white and yellow” metals
Cools better than straight oil to allow higher metal removal rates without heat damage
Contains a proven and highly effective extreme pressure (EP) additive to control built-up edge and prevent wheel loading and packing
Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
Coolant residue is easily removed with water, working solution or aqueous cleaners
Easy recycling or disposal with conventional techniques and equipment
TRIM® Machine Tool Sump and System Cleaner
TRIM® Whamex™ is a safe, fast-acting concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM® metalworking fluids when used as directed.
A very specialized formula that draws on Master Chemical’s knowledge of coolant formulation and many years of hands-on experience in machine cleanouts
Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas - getting rid of these residues is one of the best ways to extend coolant life in your system
Very hard water tolerant allowing it to be effective in raw water or used coolant
Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low VOC content and no SARA 313 reportable ingredients
When used as directed below, this product is compatible with TRIM® brand synthetic, semisynthetic and soluble oil coolants, as well as most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won’t leave a slippery residue
Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways
UNIMIX™ EMC
UNIMIX™ EMC is a high accuracy self-powered proportioning pump made specially for dispensing TRIM® cleaning compounds. Special components resist even high pH powered cleaner formulations.
Aerospace
