Master Chemical's
commitment to education in the classroom spills over into the area of videos.
Centrifugal Removal of Tramp Oil by a High Speed Disc Bowl Centrifuge
The effect of tramp oil on coolant filtration and the effectiveness of high-speed centrifugation
in the removal of emulsified tramp oils from coolants.
1991-02-01, US-English
Concentration Control of Cutting and Grinding Fluids by Using a Refractometer
This is a funny and educational video is to help people who use cutting and grinding fluids (commonly called coolants) to machine metal using large milling or grinding type machines. The video has two characters, Clark is the machine operator and Devin is the TRIM® representative who helps Clark understand how to take care of the cutting fluid in his sump so that he gets better tool life and avoids rust and odor issues.
Starring:
Clark M. Callis
Devin O. Sizemore
Special thanks to Misco for the use of one of their Palm Abbe Digital Refractometers and to Owens Community College for the use of their machine shop.
2010-07-09, US-English
CONSERVATION
Traces Master Chemical's development of Coolant Recycling as an effort to conserve natural resources
and preserve the environment. This leads into a computer graphic and video overview of how coolant
recycling works with our XYBEX® Recycling Equipment. This brief narrated program with music is a
"must see" in gaining an introduction to coolant recycling.
1987-05-01, US-English
Dustin McCallum Speaks About TRIM® VHP® 814
Dustin McCallum of TUMAC, Inc. speaks about how they were able to change their machining processes because of TRIM VHP E814. They are now able to roll tap instead of cut tap. They also were able to keep tools from degrading during their very long and complex cutting which meant that they could meet their clients surface finish requirements.
2011-02-18, US-English
MACHINE TALK: A HANDY GUIDE TO A CLEAN MACHINE
You’ll like “Hank” and “CJ.” They may not sound like experts, but they know how to clean
machines—inside and out. And while they won’t bore you with the process, they don’t skip any steps,
either. As a result the 2002 edition of Master Chemical’s Machine Cleaning video is instructive,
slightly irreverent and completely unorthodox. You’d better request your copy, now. This program
replaces #76 “EIGHT BASIC STEPS TO MACHINE CLEANING”
2002-03-15, US-English
Master Chemical Corporation wins Affiliated Distributors' 2011 Industrial Supplier of the Year for Performance Award at the North American Meeting in Las Vegas.
Gabriel Escobar, Shop Manager, of HELI-TECH is pleased to speak about how MicroSol 585XT allowed him to convert HELI-TECH's entire shop from two types of coolants to just one. He finds it much more convenient to have just one coolant. MicroSol 585XT solved rusting issues and his high-pressure application needs!
2011-01-24, US-English
Superior Metalworking with Low-foaming TRIM® MicroSol® 585XT
Greetings, this is Mark Scherer, from Master Chemical Corporation, with a visual demonstration of how we significantly improved the low foaming characteristics of one of our TRIM® cutting fluids.
On the left is TRIM® MicroSol® 585, while on the right is our new TRIM® MicroSol® 585XT, an extended-life, nonchlorinated semisynthetic metalworking fluid.
Both products are mixed using a standard kitchen mixer and at exactly five minutes the mixer is stopped. Notice how quickly the foam completely dissipates from our new MicroSol 585XT. It only takes seven seconds, compared to fourteen seconds for the original MicroSol 585.
For more information about MicroSol 585XT and other cutting fluids, please visit our website www.masterchemical.com.
2009-10-20, US-English
The Effect of hard Water on Coolant Filtration
The effect of hard water on the filterability of water-soluble coolants.
1991-02-01, US-English
Turn Your Machine Cleaning Downtime Into Uptime With Whamex XT™
Whamex, has an excellent reputation for easy, fast, and productive, machine sump and coolant system clean outs. Whamex can be added to machines, utilizing emulsion or semisynthetic coolants, and will start cleaning the sump while parts are still being cut. However, when used with pure synthetic coolants, Whamex is difficult to use while still cutting parts -- because it can create a lot of foam. As part of our Master STAGES' surface treatment product line, we are introducing low-foaming Whamex XT. Production time is now increased for machine sumps filled with synthetic coolants -- parts can be cut while the cleaning process begins!
The new Whamex XT cleans just as well as the original. In this side-by-side drip demonstration, on the left is the original Whamex. On the right, is the new Whamex XT. Both are cleaning the purple-dyed typical semisynthetic coolant, equally well.
As for foam, even under extreme agitation, which is validated by this mixer test, a mixture of the new Whamex XT and a typical synthetic coolant is breaking foam as quickly as the beater is creating it. And when the agitation is stopped, any foam in the new, Whamex XT, breaks immediately. This demonstrates the low-foaming characteristics of Whamex XT. And, how machine-cleaning downtime can be turned into uptime!
Contact your Master Chemical distributor today. And start benefiting from the amazing new low-foaming machine-cleaning technology -- Whamex XT!
2011-07-21, US-English
XYBEX® SYSTEM 1000 OPERATION & MAINTENANCE
(Overview with Dave Semersky) A walk around overview of the operation and integration of the
XYBEX System 1000 and twin compartment Yellow Bellied Sump Sucker. Stresses the importance
of deionized water and coolant concentration control. Serves as an introduction for the Operation and
Maintenance video modules of the XYBEX System 1000.
1990-05-01, US-English
YELLOW BELLIED SUMP SUCKER
Fast-paced program with music and professional narrator highlights features and benefits of the entire
Yellow Bellied Sump Sucker line. Both studio and in-shop pictures. Supported with computer graphics
throughout.
